JB/T 8483.1-2011Versatile lathes - Part 1: Testing of the accuracy (English PDF)
多用车床 第1部分:精度检验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8483.1-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 8483.1-2011 is the English-translated version of 多用车床 第1部分:精度检验.
Part 1 of JB/T 8483, numbered JB/T 8483.1-2011, is a recommended Chinese mechanical and machinery industry standard on the accuracy testing of versatile lathes.
It lays down the geometric accuracy and the working accuracy of general-grade machines of this type, with the matching tolerances and the corresponding test methods.
Its range is lathes with a maximum swing over the bed of 250 mm to 400 mm and a maximum workpiece length of 1000 mm. Only accuracy is tested under it: running checks such as vibration, abnormal noise and crawling of moving parts, and parameter checks such as speed and feed rate, are excluded and are done beforehand.
It takes over from JB/T 8483.1-1996 and cites GB/T 17421.1-1998. Issued on 18 May 2011, it has applied since 1 August 2011.
Found what you need?
Document preview — JB/T 8483.1-2011
National Standard of the People's Republic of China
- ICS
- 25.080.10
- Replacing
- JB/T 8483.1-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 8483.1-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 8483.1-1996.
It is one of 2 parts of the JB/T 8483 series.
2 Scope Preview
Part 1 of JB/T 8483, numbered JB/T 8483.1-2011, is a recommended Chinese mechanical and machinery industry standard on the accuracy testing of versatile lathes. It lays down the geometric accuracy and the working accuracy of general-grade machines of this type, with the matching tolerances and the corresponding test methods. Its range is lathes with a maximum swing over the bed of 250 mm to 400 mm and a maximum workpiece length of 1000 mm. Only accuracy is tested under it: running checks such as vibration, abnormal noise and crawling of moving parts, and parameter checks such as speed and feed rate, are excluded and are done beforehand. It takes over from JB/T 8483.1-1996 and cites GB/T 17421.1-1998.
JB/T 8483.1-2011 falls under ICS 25.080.10, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
4 Where this standard sits
It cites one other standard, GB/T 17421.1-1998, listed in full above.
It is one part of the JB/T 8483 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 8483.2-1996 — Multi-purpose lathes - Technical specifications
Other editions:
JB/T 8483.1-1996 (earlier edition)
7 Classification and status
International classification (ICS): 25.080.10
Chinese Standard Classification (CCS): J 53
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 8483.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8483.1-2011 | Versatile lathes - Part 1: Testing of the accuracy | current edition | Current |
| JB/T 8483.1-1996 | Versatile lathes - Part 1: Testing of the accuracy | previous edition | Superseded |
This page sells the current edition, JB/T 8483.1-2011. Earlier editions are listed for reference only.
How to Download JB/T 8483.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
JB/T 8483.2-1996 — Multi-purpose lathes - Technical specifications
JB/T 8483.1-1996 — Multi-purpose lathes - Testing of accuracy
JB/T 8483.1-2011
$85.00