JB/T 8413.3-2008Internal combustion engines - Oil pumps - Part 3: Powder metallurgy rotors - Technical requirements (English PDF)
内燃机 机油泵 第3部分:粉末冶金转子 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8413.3-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 8413.3-2008 is the English-translated version of 内燃机 机油泵 第3部分:粉末冶金转子 技术条件.
JB/T 8413.3-2008 is the Chinese machinery industry standard covering internal combustion engines - Oil pumps, Part 3: Powder metallurgy rotors - Technical requirements.
It was issued on 1 February 2008 and has been in force since 1 July 2008, replacing JB/T 5090-1991. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2008 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8413.3-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 5090-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8413.3-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It is one of 15 parts of the JB/T 8413 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 8413.3-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
One other standard in this catalogue cites it: QC/T 229-2013.
It is one part of the JB/T 8413 series, of which this catalogue holds 15 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 8413-1996 — Lubricating oil pumps - Technical specifications
JB/T 8413.1-2010 — Part 1: Assemblies - Technical requirements
JB/T 8413.1-2025 — Internal combustion engine - oil pump - Part 1: Assembly - Technical Specifications
JB/T 8413.2-2010 — Part 2: Assemblies-Methods for test
JB/T 8413.2-2025 — Internal combustion engine - Oil pump - Part 2: Assembly - Test Methods
JB/T 8413.4-2015 — Part 4: Steel gears - Technical requirements
JB/T 8413.5-2008 — Part 5: Powder metallurgy gears - Technical requirements
JB/T 8413.5-2025 — Internal combustion engine - oil pump - Part 5: Powder metallurgy gear - Technical Specifications
JB/T 8413.6-2015 — Part 6: Drive shafts - Types and dimensions of shaft ends
JB/T 8413.7-2015 — Part 7: Assemblies - Reliability assessment methods
JB/T 8413.8-2019 — Part 8: Variable displacement oil pumps
JB/T 8413.9-2019 — Part 9: Electronically controlled oil pumps
JB/T 8413.10-2019 — Part 10: Electric oil pumps
JB/T 8413.11-2019 — Part 11: Transmission oil pumps
Other editions:
JB/T 8413.3-2025 (later edition)
Standards on related subjects:
JB/T 5089.3-2020 — Internal combustion engines - Paper element oil filters - Part 3: Test methods
GB/T 8243.7-2017 — Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 7: Vibration fatigue test
JB/T 10505-2016 — Internal combustion engines - Oil radiators - Specification
6 Classification and status
Chinese Standard Classification (CCS): J 95
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 8413.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8413.3-2008 | Internal combustion engines - Oil pumps - Part 3: Powder metallurgy rotors - Technical requirements | current edition | Current |
| JB/T 5090-1991 | Internal combustion engines - Oil pumps - Part 3: Powder metallurgy rotors - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 8413.3-2008. Earlier editions are listed for reference only.
How to Download JB/T 8413.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8413.4-2015 — Internal combustion engines - Oil pumps - Part 4: Steel gears - Technical requirements
JB/T 8413.2-2010 — Internal combustion engines - Oil pumps - Part 2: Assemblies-Methods for test
JB/T 8413.5-2025 — Internal combustion engine - oil pump - Part 5: Powder metallurgy gear - Technical Specifications
JB/T 8413.3-2008
$105.00