JB/T 11324-2013Internal Combustion Engines Turbochargers - Powder Metallurgy Thrust Bearings - Specification (English PDF)
内燃机涡轮增压器 粉末冶金止推轴承 技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11324-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11324-2013 is the English-translated version of 内燃机涡轮增压器 粉末冶金止推轴承 技术规范.
JB/T 11324-2013 is the Chinese machinery industry standard for the powder metallurgy thrust bearing of an internal combustion engine turbocharger, and it is written as the technical specification for that bearing.
Among the standards it quotes are GB/T 231.1, GB/T 2828.1, GB/T 5163, GB/T 7963, GB/T 7964, JB/T 8063.1, JB/T 8063.2, JB/T 8063.3, JB/T 8063.4, JB/T 8063.5, JB/T 8063.6, JB/T 8063.7 and JB/T 8063.8.
The Ministry of Industry and Information Technology issued it. Its Chinese classification is J91 and its international classification 27.020.
Found what you need?
Document preview — JB/T 11324-2013
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 11324-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
2 Scope
This standard is the Chinese machinery industry standard for the powder metallurgy thrust bearing of an internal combustion engine turbocharger, and it is written as the technical specification for that bearing. Among the standards it quotes are GB/T 231.1, GB/T 2828.1, GB/T 5163, GB/T 7963, GB/T 7964, JB/T 8063.1, JB/T 8063.2, JB/T 8063.3, JB/T 8063.4, JB/T 8063.5, JB/T 8063.6, JB/T 8063.7 and JB/T 8063.8. The Ministry of Industry and Information Technology issued it. Its Chinese classification is J91 and its international classification 27.020.
3 Normative references
JB/T 11324-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 231.1
GB/T 2828.1
GB/T 5163
GB/T 7963
GB/T 7964
JB/T 8063.1
JB/T 8063.2
JB/T 8063.3
JB/T 8063.4
JB/T 8063.5
JB/T 8063.6
JB/T 8063.7
JB/T 8063.8
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 27.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 231.1Metallic materials - Brinell hardness test - Part 1: Test method
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 5163Sintered metal materials, excluding hard metals -- Permeable sintered metal materials -- Determination of density, oil content, and open porosity
- GB/T 7963Sintered metal materials, excluding hard metals -- Tensile test pieces
- GB/T 7964Sintered metal materials( excluding hardmetal )—Tension testing at room temperature
- JB/T 8063.1Methods for chemical analysis of powder metallurgy materials and products - Part 1: The gas volumetric method for the determination of carbon in iron-based materials and products
Similar standards
How to Download JB/T 11324-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 231.1-2018 — Metallic materials - Brinell hardness test - Part 1: Test method
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 5163-2006 — Sintered metal materials, excluding hard metals -- Permeable sintered metal materials -- Determination of density, oil content, and open porosity
Secure payment via Stripe
Payments accepted
JB/T 11324-2013
$149.00