JB/T 8354.1-2013Metallic abrasives for shot blast cleaning and shot peening - Part 1: Cut steel wire shot (English PDF)
抛喷丸清理及强化用金属磨料 第1部分:钢丝切丸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8354.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 8354.1-2013 is the English-translated version of 抛喷丸清理及强化用金属磨料 第1部分:钢丝切丸.
JB/T 8354.1-2013 is part 1 of the recommended Chinese machinery industry standard on metallic abrasives for shot blast cleaning and shot peening, and it covers cut steel wire shot.
The part sets the types of this abrasive, the specification grades, the performance requirements, the sampling and the test methods. It applies to shot cut from cold-drawn steel wire.
The requirements are written around the abrasive as a supplied product, from its grading through to the tests used to check it. Among the standards it quotes are GB/T 223.3, GB/T 223.5, GB/T 223.58, GB/T 19816.1 and GB/T 19816.3. Cut steel wire shot is classified J61 in China and 25.120.30 internationally.
Found what you need?
Document preview — JB/T 8354.1-2013
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Replacing
- JB/T 8354-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 8354.1-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It is one of 9 parts of the JB/T 8354 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is part 1 of the recommended Chinese machinery industry standard on metallic abrasives for shot blast cleaning and shot peening, and it covers cut steel wire shot. The part sets the types of this abrasive, the specification grades, the performance requirements, the sampling and the test methods. It applies to shot cut from cold-drawn steel wire. The requirements are written around the abrasive as a supplied product, from its grading through to the tests used to check it. Among the standards it quotes are GB/T 223.3, GB/T 223.5, GB/T 223.58, GB/T 19816.1 and GB/T 19816.3. Cut steel wire shot is classified J61 in China and 25.120.30 internationally.
JB/T 8354.1-2013 falls under ICS 25.120.30, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 223.3
GB/T 223.5
GB/T 223.58
GB/T 223.59
GB/T 223.60
GB/T 223.61
GB/T 223.62
GB/T 223.63
GB/T 223.64
GB/T 223.68
GB/T 223.69
GB/T 223.71
GB/T 223.72
GB/T 223.85
GB/T 223.86
GB/T 19816.1
GB/T 19816.3
GB/T 19816.4
GB/T 19816.5
4 Where this standard sits
It cites 19 standards, listed in full above.
It is one part of the JB/T 8354 series, of which this catalogue holds 9 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 8354-1996 — Cut steel wire shot
JB/T 8354.2-2015 — Part 2: High carbon cast steel shot
JB/T 8354.3-2015 — Part 3: High carbon cast steel grit
JB/T 8354.4-2015 — Part 4: Low carbon cast steel shot
JB/T 8354.5-2015 — Part 5: Stainless steel shot
JB/T 8354.6-2025 — Metallic abrasives of shot blast cleaning and peening - Part 6: Stainless steel grit
JB/T 8354.9-2025 — Metallic abrasives of shot blast cleaning and peening - Part 9: Cast iron shot
JB/T 8354.10-2020 — Metallic abrasives of shot blast cleaning and shot peening - Part 10: Cast iron grit
Standards on related subjects:
GB/T 37365-2019 — Die casting unit—Performance testing method
GB/T 21269-2018 — Cold chamber die casting machines
JB/T 12243-2015 — Die-casting unit - Safety signs
7 Classification and status
International classification (ICS): 25.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 223.3Iron, steel and alloy - Determination of phosphorus content - Spectrophotometric method, titrimetric method and gravimetric method
- GB/T 223.5Steel and iron -- Determination of acid-soluble silicon and total silicon content -- Reduced molybdosilicate spectrophotometric method
- GB/T 223.58Methods for chemical analysis of iron, steel and alloy - The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content
- GB/T 223.59Iron,steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
- GB/T 223.60Iron, steel and alloy - Determination of silicon content - Gravimetric method
- GB/T 223.61Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
Similar standards
Editions of JB/T 8354.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8354.1-2013 | Metallic abrasives for shot blast cleaning and shot peening - Part 1: Cut steel wire shot | current edition | Current |
| JB/T 8354-1996 | Metallic abrasives for shot blast cleaning and shot peening - Part 1: Cut steel wire shot | previous edition | Superseded |
This page sells the current edition, JB/T 8354.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 8354.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19816.1-2005 — Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling
GB/T 19816.3-2005 — Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness
GB/T 19816.4-2005 — Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density
JB/T 8354.1-2013
$105.00