JB/T 8354.2-2015Metallic abrasives for shot blast cleaning and shot peening - Part 2: High carbon cast steel shot (English PDF)
抛喷丸清理及强化用金属磨料 第2部分：高碳铸钢丸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8354.2-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 8354.2-2015 is the English-translated version of 抛喷丸清理及强化用金属磨料 第2部分：高碳铸钢丸.
JB/T 8354.2-2015 is a recommended Chinese machinery industry standard forming Part 2 of the specification for metallic abrasives used in shot blast cleaning and shot peening, and its subject is high carbon cast steel shot.
The text sets the terms and definitions, the grade specifications, the sampling and the performance requirements for this abrasive. What it applies to is cast steel shot in the new condition in which it is supplied; the standard says it does not apply to the shot during use or after use.
Among the standards it quotes are GB/T 223.5, GB/T 19816.1 and GB/T 19816.2. Its Chinese classification code is J61 and its international classification is 25.120.30.
Found what you need?
Document preview — JB/T 8354.2-2015
National Standard of the People's Republic of China
- ICS
- 25.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 8354.2-2015 was issued by MIIT on 30 April 2015 and has been in force since 1 October 2015.
It is one of 9 parts of the JB/T 8354 series.
2 Scope
This standard is a recommended Chinese machinery industry standard forming Part 2 of the specification for metallic abrasives used in shot blast cleaning and shot peening, and its subject is high carbon cast steel shot. The text sets the terms and definitions, the grade specifications, the sampling and the performance requirements for this abrasive. What it applies to is cast steel shot in the new condition in which it is supplied; the standard says it does not apply to the shot during use or after use. Among the standards it quotes are GB/T 223.5, GB/T 19816.1 and GB/T 19816.2. Its Chinese classification code is J61 and its international classification is 25.120.30.
3 Normative references
JB/T 8354.2-2015 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 223.3
GB/T 223.5
GB/T 223.58
GB/T 223.59
GB/T 223.60
GB/T 223.61
GB/T 223.62
GB/T 223.63
GB/T 223.64
GB/T 223.68
GB/T 223.69
GB/T 223.71
GB/T 223.72
GB/T 223.85
GB/T 223.86
GB/T 19816.1
GB/T 19816.2
GB/T 19816.3
GB/T 19816.4
GB/T 19816.5
GB/T 19816.6
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 8354-1996 — Cut steel wire shot
JB/T 8354.1-2013 — Part 1: Cut steel wire shot
JB/T 8354.3-2015 — Part 3: High carbon cast steel grit
JB/T 8354.4-2015 — Part 4: Low carbon cast steel shot
JB/T 8354.5-2015 — Part 5: Stainless steel shot
JB/T 8354.6-2025 — Metallic abrasives of shot blast cleaning and peening - Part 6: Stainless steel grit
JB/T 8354.9-2025 — Metallic abrasives of shot blast cleaning and peening - Part 9: Cast iron shot
JB/T 8354.10-2020 — Metallic abrasives of shot blast cleaning and shot peening - Part 10: Cast iron grit
6 Classification and status
International classification (ICS): 25.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 223.3Iron, steel and alloy - Determination of phosphorus content - Spectrophotometric method, titrimetric method and gravimetric method
- GB/T 223.5Steel and iron -- Determination of acid-soluble silicon and total silicon content -- Reduced molybdosilicate spectrophotometric method
- GB/T 223.59Iron,steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
- GB/T 223.60Iron, steel and alloy - Determination of silicon content - Gravimetric method
- GB/T 223.61Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
- GB/T 223.62Methods for chemical analysis of iron,steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.58
Similar standards
How to Download JB/T 8354.2-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19816.1-2005 — Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling
GB/T 19816.2-2005 — Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution
GB/T 19816.3-2005 — Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness
Secure payment via Stripe
Payments accepted
JB/T 8354.2-2015
$199.00