JB/T 8312.2-1996Engineering plastic fan covers for small asynchronous motors - Technical specifications (frame sizes 63 to 160) (English PDF)
小型异步电动机用工程塑料风罩技术条件(机座号63~160)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8312.2-1996 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 11, 1996
Implementation date
October 1, 1996
Scope
JB/T 8312.2-1996 is the English-translated version of 小型异步电动机用工程塑料风罩技术条件(机座号63~160).
JB/T 8312.2-1996 is the Chinese machinery industry standard covering engineering plastic fan covers for small asynchronous motors - Technical specifications (frame sizes 63 to 160).
It was issued on 11 April 1996 and has been in force since 1 October 1996, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1996 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8312.2-1996
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8312.2-1996 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 April 1996 and has been in force since 1 October 1996.
It is one of 3 parts of the JB/T 8312 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 8312.2-1996 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 8312.1-1996 — Engineering plastic fans for small induction motors - Technical specifications (frame sizes 63 to 355)
JB/T 8312.1-2005 — Engineering plastic fans for small and medium-sized induction motors - Technical requirements (frame size 63 to 355)
Standards on related subjects:
GB/T 1032-2023 — Test methods for three-phase asynchronous motors
GB/T 13957-2022 — Technical requirements for the fundamental series of three-phase large asynchronous motor
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 7118-2025 — YVF Series (IP55) Variable Frequency Speed Control Three-Phase Asynchronous Motors Technical Specifications (Frame Sizes 63 to 355)
JB/T 5275-2022 — Specification for YE2-W and YE2-WF series outdoor and outdoor chemical corrosion-resistant three-phase induction motors (frame size 63 to 355)
JB/T 5271-2022 — Specification for YE2 series (IP23) three-phase induction motors (frame size 160~400)
5 Classification and status
Chinese Standard Classification (CCS): K 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 8312.2-1996
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8312.1-1996 — Engineering plastic fans for small induction motors - Technical specifications (frame sizes 63 to 355)
JB/T 8312.1-2005 — Engineering plastic fans for small and medium-sized induction motors - Technical requirements (frame size 63 to 355)
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 8312.2-1996
$365.00