Valid

JB/T 8312.1-2005Engineering plastic fans for small and medium-sized induction motors - Technical requirements (frame size 63 to 355) (English PDF)

中小型异步电机用工程塑料风扇 技术条件(机座号63~355)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8312.1-2005 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 14, 2005

Implementation date

August 1, 2005

Scope

JB/T 8312.1-2005 is the English-translated version of 中小型异步电机用工程塑料风扇 技术条件(机座号63~355).

JB/T 8312.1-2005 is the Chinese machinery industry standard covering engineering plastic fans for small and medium-sized induction motors - Technical requirements (frame size 63 to 355).

It was issued on 14 February 2005 and has been in force since 1 August 2005, replacing JB/T 8312.1-1996. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 2005 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 8312.1-2005

National Standard of the People's Republic of China

Replacing
JB/T 8312.1-1996

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 8312.1-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 February 2005 and has been in force since 1 August 2005.

It replaces the earlier edition JB/T 8312.1-1996.

It is one of 2 parts of the JB/T 8312 series.

2 Scope Preview

JB/T 8312.1-2005 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 8312.2-1996 — Engineering plastic fan covers for small asynchronous motors - Technical specifications (frame sizes 63 to 160)

Other editions:

JB/T 8312.1-1996 (earlier edition)

Standards on related subjects:

GB/T 7409.4-2023 — Excitation systems for synchronous machines - Part 4: Technical requirements of excitation systems for medium and small synchronous machines

GB/T 10068-2020 — Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

JB/T 9615.1-2000 — Test methods for interturn insulation of random-wound windings of low-voltage AC machines

JB/T 6227-2021 — Hydrogen-cooled electrical machines - Gas tightness test methods and assessment

JB/T 6517-2018 — Technical requirements for hydrogen, oil and water control systems of large generators

JB/T 2728.1-2017 — Gas coolers for electrical machines - Part 1: General rules

5 Classification and status

Chinese Standard Classification (CCS): K 22

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 8312.1

EditionTitleRevisionStatus
JB/T 8312.1-2005Engineering plastic fans for small and medium-sized induction motors - Technical requirements (frame size 63 to 355)current editionCurrent
JB/T 8312.1-1996Engineering plastic fans for small and medium-sized induction motors - Technical requirements (frame size 63 to 355)previous editionSuperseded

This page sells the current edition, JB/T 8312.1-2005. Earlier editions are listed for reference only.

How to Download JB/T 8312.1-2005

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8312.1-2005

$85.00