Valid

JB/T 8055-1996Direct-fired lithium bromide absorption water chillers-heaters (English PDF)

直燃型溴化锂吸收式冷、热水机组

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8055-1996 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

September 3, 1996

Implementation date

July 1, 1997

Scope

JB/T 8055-1996 is the English-translated version of 直燃型溴化锂吸收式冷、热水机组.

JB/T 8055-1996 is the Chinese standard "Direct-fired lithium bromide absorption water chillers-heaters".

Its scope clause reads: This standard specifies the types, basic parameters, technical requirements, test methods, inspection rules, marking, packaging and storage of direct-fired lithium bromide absorption chilling and heating units, hereinafter referred to as "units".

It applies to units fired by oil or gas, using water as the refrigerant and an aqueous lithium bromide solution as the absorbent, which produce chilled and hot water for air conditioning alternately.

Units that produce chilled and hot water for air conditioning and for process use at the same time should also follow this standard as a reference.

Found what you need?

Document preview — JB/T 8055-1996

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Definitions
  • 4 Types and basic parameters

1 Scope

This standard specifies the types, basic parameters, technical requirements, test methods, inspection rules, marking, packaging and storage of direct-fired lithium bromide absorption chilling and heating units, hereinafter referred to as "units".

It applies to units fired by oil or gas, using water as the refrigerant and an aqueous lithium bromide solution as the absorbent, which produce chilled and hot water for air conditioning alternately. Units that produce chilled and hot water for air conditioning and for process use at the same time should also follow this standard as a reference.

2 Normative references

The provisions contained in the following standards become provisions of this standard through reference in this standard. The editions shown were valid at the time of publication of this standard. All standards are subject to revision, and the parties using this standard should consider the possibility of applying the latest editions of the standards listed below.

GB 252-87 Light diesel fuel

GB 445-77 (confirmed 1988) Heavy diesel fuel

GB 711-88 Hot-rolled quality carbon structural steel plate and wide strip

GB 713-86 Carbon and low-alloy steel plate for boilers

GB 1527-87 Drawn copper tube

GB/T 2624-93 Measurement of fluid flow in closed conduits by means of orifice plates, nozzles and Venturi tubes

GB 3087-82 Seamless steel tube for low and medium pressure boilers

GB 3274-88 Hot-rolled plate and strip of carbon structural steel and low-alloy structural steel

GB 3785-83 Sound level meters - Electrical and acoustical performance and test methods

GB 8890-88 Copper alloy tube for heat exchangers

GB 10180-88 Code for the thermal performance test of industrial boilers

GB 13271-91 Emission standard for air pollutants from boilers

GB/T 13306-91 Nameplates

GB/T 13384-92 General specifications for the packaging of mechanical and electrical products

GB 13612-92 Manufactured gas

JB/T 5281-91 Specification for direct-drive rotary vane vacuum pumps

JB 5777.2-91 Specification for control panels and consoles

JB 6217-92 Specification for PB series flameproof canned motors

JB/T 6446-92 Specification for vacuum valves

JB/T 6918-93 Metal-to-glass sintered liquid level indicators and sight glasses for refrigeration

JB/T 7247-94 Lithium bromide absorption water chilling units

ZB J73 040-89 General specification for the electrical control equipment of refrigerant compressor units

ZB J78 004-87 Specification for XZ type rotary vane vacuum pumps

ZB N04 009-88 General specification for industrial automation instrument panels

SH 0356-92 Heavy oil (fuel oil)

SY 7514-90 Natural gas

3 Definitions

Direct-fired lithium bromide absorption chilling and heating unit: equipment fired by oil or gas, using water as the refrigerant and an aqueous lithium bromide solution as the absorbent, which produces chilled and hot water for air conditioning and for process use, alternately or simultaneously, under vacuum.

4 Types and basic parameters

4.1 Types

Units are divided into two types: oil-fired and gas-fired.

4.2 Designation

The designation of a unit is formed as follows, the modification number being given in Chinese pinyin letters.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download JB/T 8055-1996

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8055-1996

$650.00