JB/T 7881.1-1999Sheep shearing machines - Terminology (English PDF)
剪羊毛机 术语
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7881.1-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 6, 1999
Implementation date
January 1, 2000
Scope
JB/T 7881.1-1999 is the English-translated version of 剪羊毛机 术语.
JB/T 7881.1-1999 is the Chinese machinery industry standard covering sheep shearing machines - Terminology. It was issued on 6 August 1999 and has been in force since 1 January 2000, replacing JB/T 7881.1-1995.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1999 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7881.1-1999
National Standard of the People's Republic of China
- Replacing
- JB/T 7881.1-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7881.1-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 August 1999.
It replaces the earlier edition JB/T 7881.1-1995.
It is one of 14 parts of the JB/T 7881 series.
2 Scope Preview
JB/T 7881.1-1999 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 7881-2024 — Sheep shearer
JB/T 7881.2-1995 — Sheep shearing machines - Types and basic parameters
JB/T 7881.2-1999 — Sheep shearing machines - Types and basic parameters
JB/T 7881.2-2010 — Sheep shears - Part 2: Types and basic parameters
JB/T 7881.3-1995 — Sheep shearing machines - Specifications
JB/T 7881.3-1999 — Sheep shearing machines - Technical specifications
JB/T 7881.3-2010 — Sheep shears - Part 3: Technical requirements
JB/T 7881.4-1995 — Sheep shearing machines - Test methods
JB/T 7881.4-1999 — Sheep shearing machines - Test methods
JB/T 7881.4-2010 — Sheep shears - Part 4: Test methods
JB/T 7881.5-1995 — Sheep shearing machines - Blades
JB/T 7881.5-1999 — Sheep shearing machines - Cutters
JB/T 7881.5-2010 — Sheep shears - Part 5: Blades
Other editions:
JB/T 7881.1-2010 (later edition)
JB/T 7881.1-1995 (earlier edition)
Standards on related subjects:
GB/T 12785-2014 — Test methods for submersible motor-pumps
GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19：Centre pivot and moving lateral types irrigation machines
JB/T 10600-2006 — Vertical self-priming pumps
5 Classification and status
Chinese Standard Classification (CCS): B 92
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 7881.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7881.1-1999 | Sheep shearing machines - Terminology | current edition | Current |
| JB/T 7881.1-1995 | Sheep shearing machines - Terminology | previous edition | Superseded |
This page sells the current edition, JB/T 7881.1-1999. Earlier editions are listed for reference only.
How to Download JB/T 7881.1-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7881.2-2010 — Sheep shears - Part 2: Types and basic parameters
JB/T 7881.2-1999 — Sheep shearing machines - Types and basic parameters
JB/T 7881.2-1995 — Sheep shearing machines - Types and basic parameters
Secure payment via Stripe
Payments accepted
JB/T 7881.1-1999
$165.00