JB/T 7645.8-2008Guide units of stamping dies - Part 8: Guide bush holders (English PDF)
冲模导向装置 第8部分:导套座
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7645.8-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 7645.8-2008 is the English-translated version of 冲模导向装置 第8部分:导套座.
JB/T 7645.8-2008 is a recommended Chinese machinery industry standard and the eighth part of the Chinese series on guide units of stamping dies, the part for guide bush holders.
It specifies the dimensions of the guide bush holder of a stamping die and the marking by which it is designated. The parts it is applied to are the guide bush holders of dies.
It quotes JB/T 7653. The Ministry of Industry and Information Technology issued the standard in place of JB/T 7645.8-1994, and the classification codes recorded for it are J46 in the Chinese system and 25.120.30 in the international system.
Found what you need?
Document preview — JB/T 7645.8-2008
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Replacing
- JB/T 7645.8-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 7645.8-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It replaces the earlier edition JB/T 7645.8-1994.
It is one of 15 parts of the JB/T 7645 series.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard and the eighth part of the Chinese series on guide units of stamping dies, the part for guide bush holders. It specifies the dimensions of the guide bush holder of a stamping die and the marking by which it is designated. The parts it is applied to are the guide bush holders of dies. It quotes JB/T 7653. The Ministry of Industry and Information Technology issued the standard in place of JB/T 7645.8-1994, and the classification codes recorded for it are J46 in the Chinese system and 25.120.30 in the international system.
JB/T 7645.8-2008 falls under ICS 25.120.30, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 7653
4 Where this standard sits
It cites one other standard, JB/T 7653, listed in full above.
It is one part of the JB/T 7645 series, of which this catalogue holds 15 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 7645.1-1994 — Guiding devices for stamping dies - Type A small guide pillars
JB/T 7645.1-2008 — Part 1: Small guide pillars - Type A
JB/T 7645.2-1994 — Guiding devices for stamping dies - Type B small guide pillars
JB/T 7645.2-2008 — Part 2: Small guide pillars - Type B
JB/T 7645.3-1994 — Guiding devices for stamping dies - Small guide bushings
JB/T 7645.3-2008 — Part 3: Small guide bushes
JB/T 7645.4-1994 — Guiding devices for stamping dies - Plate-clamped guide pillars
JB/T 7645.4-2008 — Part 4: Plate-clamped guide pillars
JB/T 7645.5-1994 — Guiding devices for stamping dies - Plate-clamped guide bushings
JB/T 7645.5-2008 — Part 5: Plate-clamped guide bushes
JB/T 7645.6-1994 — Guiding devices for stamping dies - Clamping plates
JB/T 7645.6-2008 — Part 6: Clamping plates
JB/T 7645.7-1994 — Guiding devices for stamping dies - Guide pillar holders
JB/T 7645.7-2008 — Part 7: Guide pillar holders
Other editions:
JB/T 7645.8-1994 (earlier edition)
Standards on related subjects:
GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack
GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions
JB/T 6057-1992 — Steels for moulding parts of plastic moulds and their heat treatment - Technical specifications
7 Classification and status
International classification (ICS): 25.120.30
Chinese Standard Classification (CCS): J 46
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 7645.8
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7645.8-2008 | Guide units of stamping dies - Part 8: Guide bush holders | current edition | Current |
| JB/T 7645.8-1994 | Guide units of stamping dies - Part 8: Guide bush holders | previous edition | Superseded |
This page sells the current edition, JB/T 7645.8-2008. Earlier editions are listed for reference only.
How to Download JB/T 7645.8-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7645.8-2008
$145.00