Valid

JB/T 7645.7-2008Guide units of stamping dies - Part 7: Guide pillar holders (English PDF)

冲模导向装置 第7部分:导柱座

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7645.7-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 7645.7-2008 is the English-translated version of 冲模导向装置 第7部分:导柱座.

Part 7 of the Chinese rules for the guide units of stamping dies is JB/T 7645.7-2008, a recommended machinery industry standard covering guide pillar holders. The document fixes the dimensions of the guide pillar holder used in a stamping die and the marking and designation given to it.

The components it is applied to are the guide pillar holders fitted in stamping dies. It quotes JB/T 7653. The standard takes the place of JB/T 7645.7-1994 and was issued by the Ministry of Industry and Information Technology, which recorded it under the Chinese classification code J46 and the international classification 25.120.30.

Found what you need?

Document preview — JB/T 7645.7-2008

National Standard of the People's Republic of China

ICS
25.120.30
Replacing
JB/T 7645.7-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 7645.7-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It replaces the earlier edition JB/T 7645.7-1994.

It is one of 15 parts of the JB/T 7645 series.

2 Scope Preview

Part 7 of the Chinese rules for the guide units of stamping dies is JB/T 7645.7-2008, a recommended machinery industry standard covering guide pillar holders. The document fixes the dimensions of the guide pillar holder used in a stamping die and the marking and designation given to it. The components it is applied to are the guide pillar holders fitted in stamping dies. It quotes JB/T 7653. The standard takes the place of JB/T 7645.7-1994 and was issued by the Ministry of Industry and Information Technology, which recorded it under the Chinese classification code J46 and the international classification 25.120.30.

JB/T 7645.7-2008 falls under ICS 25.120.30, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

JB/T 7653

4 Where this standard sits

It cites one other standard, JB/T 7653, listed in full above.

It is one part of the JB/T 7645 series, of which this catalogue holds 15 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 7645.1-1994 — Guiding devices for stamping dies - Type A small guide pillars

JB/T 7645.1-2008 — Part 1: Small guide pillars - Type A

JB/T 7645.2-1994 — Guiding devices for stamping dies - Type B small guide pillars

JB/T 7645.2-2008 — Part 2: Small guide pillars - Type B

JB/T 7645.3-1994 — Guiding devices for stamping dies - Small guide bushings

JB/T 7645.3-2008 — Part 3: Small guide bushes

JB/T 7645.4-1994 — Guiding devices for stamping dies - Plate-clamped guide pillars

JB/T 7645.4-2008 — Part 4: Plate-clamped guide pillars

JB/T 7645.5-1994 — Guiding devices for stamping dies - Plate-clamped guide bushings

JB/T 7645.5-2008 — Part 5: Plate-clamped guide bushes

JB/T 7645.6-1994 — Guiding devices for stamping dies - Clamping plates

JB/T 7645.6-2008 — Part 6: Clamping plates

JB/T 7645.8-1994 — Guiding devices for stamping dies - Guide bushing holders

JB/T 7645.8-2008 — Part 8: Guide bush holders

Other editions:

JB/T 7645.7-1994 (earlier edition)

Standards on related subjects:

GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack

GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions

JB/T 6057-1992 — Steels for moulding parts of plastic moulds and their heat treatment - Technical specifications

7 Classification and status

International classification (ICS): 25.120.30

Chinese Standard Classification (CCS): J 46

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 7645.7

EditionTitleRevisionStatus
JB/T 7645.7-2008Guide units of stamping dies - Part 7: Guide pillar holderscurrent editionCurrent
JB/T 7645.7-1994Guide units of stamping dies - Part 7: Guide pillar holdersprevious editionSuperseded

This page sells the current edition, JB/T 7645.7-2008. Earlier editions are listed for reference only.

How to Download JB/T 7645.7-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7645.7-2008

$145.00