JB/T 7599.14-2013The insulating enamel for enamelled winding wires - Part 14: Self-bonding enamel based on epoxy resin (English PDF)

1 Foreword

JB/T 7599.14-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.

It is one of 22 parts of the JB/T 7599 series.

2 Scope

This standard is part 14 of the recommended Chinese machinery industry standard on insulating enamels for enamelled winding wires, and its subject is self-bonding enamel based on epoxy resin. The part sets the technical requirements for this enamel and the rules for inspecting it. It is written for class 120 acetal enamelled flat copper wire that has to be self-bonding, and for other wire products for which the enamel is suitable. Among the standards it quotes are several parts of GB/T 4074, GB/T 7095.2, JB/T 6758.1-2007 and JB/T 7599.1-2013. Its Chinese classification is K12 and its international classification 29.060.01.

3 Normative references

JB/T 7599.14-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 4074.1

GB/T 4074.3

GB/T 4074.5

GB/T 4074.6

GB/T 7095.2

JB/T 6758.1-2007 — Continuously transposed conductors - Part 1: General requirements

JB/T 7599.1-2013 — The insulating enamel for enamelled winding wires - Part 1: General requirements

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 7599.1-1994 — Insulating varnishes for enamelled winding wires - Part 1: General requirements

JB/T 7599.1-2013 — Part 1: General requirements

JB/T 7599.2-1994 — Insulating varnishes for enamelled winding wires - Part 2: Class 120 polyvinyl acetal wire enamels

JB/T 7599.2-2013 — Part 2: Polyvinyl acetal enamel, class 120

JB/T 7599.3-1994 — Insulating varnishes for enamelled winding wires - Part 3: Class 130 polyester wire enamels

JB/T 7599.3-2013 — Part 3: Polyester enamel, class 130

JB/T 7599.4-1994 — Insulating varnishes for enamelled winding wires - Part 4: Class 130 polyurethane wire enamels

JB/T 7599.4-2013 — Part 4: Polyurethane enamel, class 130

JB/T 7599.5-1994 — Insulating varnishes for enamelled winding wires - Part 5: Class 155 modified polyester wire enamels

JB/T 7599.5-2013 — Part 5: Polyester enamel, class 155

JB/T 7599.6-1994 — Insulating varnishes for enamelled winding wires - Part 6: Class 180 polyesterimide wire enamels

JB/T 7599.6-2013 — Part 6: Polyester-imine enamel, class 180

JB/T 7599.7-1994 — Insulating varnishes for enamelled winding wires - Part 7: Class 200 polyamide-imide wire enamels

JB/T 7599.7-2013 — Part 7: Polyamide-imide enamel, class 200

JB/T 7599.8-1994 — Insulating varnishes for enamelled winding wires - Part 8: Class 220 polyimide wire enamels

JB/T 7599.8-2013 — Part 8: Aromatic polyimide enamel, class 240

JB/T 7599.9-2013 — Part 9: Polyurethane enamel, class 155

JB/T 7599.10-2013 — Part 10: Polyurethane enamel, class 180

JB/T 7599.11-2013 — Part 11: Self-bonding enamel based on polyvinyl butyral resin

JB/T 7599.12-2013 — Part 12: Self-bonding enamel based on polyamide resin

JB/T 7599.13-2013 — Part 13: Self-bonding enamel based on aromatic polyamide resin

6 Classification and status

International classification (ICS): 29.060.01

Prefix JB/T: recommended standard.