Valid

JB/T 6378-2008Pneumatic directional control valves - Technical requirements (English PDF)

气动换向阀技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6378-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 16, 2008

Implementation date

December 1, 2008

Scope

JB/T 6378-2008 is the English-translated version of 气动换向阀技术条件.

JB/T 6378-2008 is the Chinese standard "Pneumatic directional control valves - Technical requirements". Its scope clause reads: This standard specifies the general requirements, performance requirements, test methods, inspection rules and product identification for pneumatic fluid power directional control valve with pressure no greater than 1.6MPa.

This standard is applicable to general-purpose pneumatic fluid power directional control valves with compressed air as the working medium, including solenoid, pneumatically, mechanically and manually controlled directional control valves. Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 6378-2008

National Standard of the People's Republic of China

ICS
23.100.50
Replacing
JB/T 6378-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword i
  • Introduction ii
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Graphic Symbols, Gas Ports and Control Mechanisms Identification
  • 5 General Requirements
  • 5.1 Working Medium
  • 5.2 Working and Ambient Temperature Range
  • 5.3 Outline and Installation Dimensions
  • 5.4 Working Frequency
  • 6 Performance Requirements
  • 6.1 Rated Pressure
  • 6.2 Control Performance
  • 6.3 Reversing Actions
  • 6.4 Switching Time
  • 6.5 Flow Characteristics
  • 6.6 Leak-tightness
  • 6.7 Electrical Performance of Solenoid Controlled Directional Control Valve
  • 6.8 Pressure resistance
  • 6.9 Gas Ports
  • 6.10 Appearance Quality
  • 7 Tests
  • 7.1 Test Conditions
  • 7.2 Performance Test
  • 8 Inspection Rules
  • 9 Identification
  • 10 Note Explanation (Reference to This Standard)
  • Bibliography

1 Scope

This standard specifies the general requirements, performance requirements, test methods, inspection rules and product identification for pneumatic fluid power directional control valve with pressure no greater than 1.6MPa.

This standard is applicable to general-purpose pneumatic fluid power directional control valves with compressed air as the working medium, including solenoid, pneumatically, mechanically and manually controlled directional control valves.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.

GB/T 156 Standard Voltage (GB/T 156-2007, IEC 60038: 2002, MOD)

GB/T 786.1 Fluid Power Systems and Components - Graphic Symbols and Circuit Diagrams - Part 1: Graphic Symbols (GB/T 786.1-1993, eqv ISO 1219-1: 1991)

GB/T 2346 Fluid Power Systems and Components - Nominal Pressures (GB/T 2346-2003, ISO 2944: 2000, MOD)

GB/T 4026 Basic and Safety Principles for Man-machine Interface, Marking and Identification - Identification of Equipment Terminals and Conductor Terminations of Certain Designated Conductors, Including General Rules for an Alphanumeric System (GB/T 4026-2004, idt IEC 60445: 1999)

GB/T 14038 Pneumatic Fluid Power - Connections - Ports and Stud Ends (GB/T 14038-2008, ISO 16030: 2001, IDT)

GB/T 14513 Pneumatic Fluid Power - Determination of Flowrate Characteristics of Pneumatic Components

GB/T 17446 Fluid Power Systems and Components - Vocabulary (GB/T 17446-1998, idt ISO 5598: 1985)

GB/T 22107 Pneumatic Fluid Power - Directional Control Valves - Measurement of Shifting Time (GB/T 22107-2008, ISO 12238: 2001, IDT)

JB/T 5967 Classification of Air-operating Gas Quality Applicable to Pneumatic Components and Systems

ISO 11727 Pneumatic Fluid Power - Identification of Ports and Control Mechanisms of Control Valves and Other Components

3 Terms and Definitions

For the purposes of this standard, the terms and definitions specified in GB/T 17446 and those listed below apply.

3.1 manipulating force

the force applied on the control device which enables manually or mechanically controlled directional control valve to work normally

3.2 elastomeric seal

the seal form that uses elastomeric seals to realize the sealing requirements

3.3 clearance seal

the seal form that uses micro clearance between kinematic pair to achieve sealing function

3.4 working frequency

the reciprocal of interval between two switching actions of pneumatic fluid power directional control valve under operating conditions, expressed in once/time

3.5 power-frequency withstand voltage

the power-frequency sinusoidal voltage (rms) not causing breakdown under specified test conditions (power frequency is 50Hz in China)

3.6 ripple coefficient

the ratio of the AC component (rms) in the rectified voltage to the average value of the rectified voltage […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 6378

EditionTitleRevisionStatus
JB/T 6378-2008Pneumatic directional control valves - Technical requirementscurrent editionCurrent
JB/T 6378-1992Pneumatic directional control valves - Technical requirementsprevious editionSuperseded

This page sells the current edition, JB/T 6378-2008. Earlier editions are listed for reference only.

How to Download JB/T 6378-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 6378-2008

$85.00