JB/T 6330-2019TG1 tubular terminals (English PDF)
TG1型管状端头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6330-2019 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 2, 2019
Implementation date
April 1, 2020
Scope
JB/T 6330-2019 is the English-translated version of TG1型管状端头.
JB/T 6330-2019 is the recommended Chinese machinery industry standard for TG1 type tubular terminals, both bare and pre-insulated. It covers their classification, the crimping tools and wires used with them, the technical requirements, the test methods and inspection rules, and the marking, packaging, transport and storage.
It applies to TG1 tubular terminals crimped onto the copper conductor of a multi-strand round copper wire once the insulation has been stripped from the wire end, for cross-sectional areas from 0.5 mm2 to 50 mm2.
Among the standards it quotes are GB/T 1531-2009, GB/T 2423.17-2008, GB/T 2828.1-2012, GB/T 5169.5-2008, GB/T 14048.1-2012, GB/T 16921-2005 and JB/T 9665-2013. It replaces JB/T 6330-1992. Issued on 2 August 2019, it has applied since 1 April 2020.
Found what you need?
Document preview — JB/T 6330-2019
National Standard of the People's Republic of China
- ICS
- 29.120
- Replacing
- JB/T 6330-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6330-2019 was issued by MIIT on 2 August 2019 and has been in force since 1 April 2020.
It replaces the earlier edition JB/T 6330-1992.
2 Scope
This standard is the recommended Chinese machinery industry standard for TG1 type tubular terminals, both bare and pre-insulated. It covers their classification, the crimping tools and wires used with them, the technical requirements, the test methods and inspection rules, and the marking, packaging, transport and storage. It applies to TG1 tubular terminals crimped onto the copper conductor of a multi-strand round copper wire once the insulation has been stripped from the wire end, for cross-sectional areas from 0.5 mm2 to 50 mm2. Among the standards it quotes are GB/T 1531-2009, GB/T 2423.17-2008, GB/T 2828.1-2012, GB/T 5169.5-2008, GB/T 14048.1-2012, GB/T 16921-2005 and JB/T 9665-2013. It replaces JB/T 6330-1992.
3 Normative references
JB/T 6330-2019 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1531-2009
GB/T 2423.17-2008
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 2829-2002
GB/T 5169.5-2008 — Fire hazard testing for electric and electronic products -- Part 5: Test flames -- Needle test method -- Apparatus, confirmatory arrangement and guidance
GB/T 5231-2012
GB/T 14048.1-2012
GB/T 14048.7-2016 — Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment -- Terminal blocks for copper conductors
GB/T 16921-2005 — Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
JB/T 9665-2013 — Type designation method for auxiliaries of low-voltage switchgear and controlgear assemblies
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6330-1992 (earlier edition)
6 Classification and status
International classification (ICS): 29.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1531-2009Copper and copper alloy capillary tube
- GB/T 2423.17-2008Environmental testing - Part 2: Test methods - Test Ka: Salt mist
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB/T 5169.5-2008Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance
- GB/T 5231-2012Designation and chemical composition of wrought copper and copper alloys
Editions of JB/T 6330
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6330-2019 | TG1 tubular terminals | current edition | Current |
| JB/T 6330-1992 | TG1 tubular terminals | previous edition | Superseded |
This page sells the current edition, JB/T 6330-2019. Earlier editions are listed for reference only.
How to Download JB/T 6330-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14048.7-2016 — Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment -- Terminal blocks for copper conductors
GB/T 16921-2005 — Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Secure payment via Stripe
Payments accepted
JB/T 6330-2019
$270.00