Valid

JB/T 6056-2005Guidelines for environmental protection in pressworking shops (English PDF)

冲压车间环境保护导则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6056-2005 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 19, 2005

Implementation date

September 1, 2005

Scope

JB/T 6056-2005 is the English-translated version of 冲压车间环境保护导则.

JB/T 6056-2005 is the Chinese machinery industry standard covering guidelines for environmental protection in pressworking shops. It was issued on 19 March 2005 and has been in force since 1 September 2005, replacing JB/T 6056-1992.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2005 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 6056-2005

National Standard of the People's Republic of China

Replacing: JB/T 6056-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

[Preview only]
1 Scope
2 Normative references
3 Terms and definitions
3.1 Type
3.2 Basic parameters
4 Types and basic parameters
4.1 Types
4.2 Model designation
4.3 Nominal operating conditions
4.4 Safety and hygiene
4.5 Welding
4.6 Bridge (After crane operation mechanism assembled)
4.7 Assembly
4.8 Electrical control equipment
4.9 Steel pretreatment and painting
5 Technical requirements
5.1 General requirements
5.2 Safety requirements
5.3 Cold and hot working forming
5.4 Rated load test
5.5 Whole machine noise test
5.6 Static rigidity test
5.7 Dynamic load test
5.8 Crane span deviation
5.9 Diagonal difference of bridge
6 Test methods
6.1 Exit-factory inspection
6.2 Type inspection
7 Inspection rules
7.1 Marking
7.2 Packaging, transportation and storage
7.3 Transportation
7.4 Storage
8 Marking, packaging, transportation and storage
9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 6056-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 19 March 2005 and has been in force since 1 September 2005.

It replaces the earlier edition JB/T 6056-1992.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 6056-2005 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

JB/T 6056-1992 (earlier edition)

Standards on related subjects:

JB/T 6401-2017 — Steels for large roll forgings - Technical requirements

GB/T 12362-2016 — Steel die forgings - Tolerance and machining allowance

GB/T 12361-2016 — Steel die forgings - General specification

JB/T 7025-2018 — Rotor and shaft forgings for 25 MW steam turbine and below - Technical specification

JB/T 6398-2018 — Heavy stainless acid resistant steel and heat resistant steel forgings - Technical specification

JB/T 4010-2018 — Ultrasonic testing for steel retaining rings of turbine generator

5 Classification and status

Chinese Standard Classification (CCS): J 09

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

JB/T 14505-2023|JB/T 14506-2023|JB/T 14507-2023|JB/T 9537-2013|GB 6249-2025|GB/T 20644.1-2025

Editions of JB/T 6056

Edition	Title	Revision	Status
JB/T 6056-2005	Guidelines for environmental protection in pressworking shops	current edition	Current
JB/T 6056-1992	Guidelines for environmental protection in pressworking shops	previous edition	Superseded

This page sells the current edition, JB/T 6056-2005. Earlier editions are listed for reference only.

How to Download JB/T 6056-2005

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.