JB/T 5966-2012Mechanical seal of submersible pumps (English PDF)
潜水电泵用机械密封
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5966-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 5966-2012 is the English-translated version of 潜水电泵用机械密封.
JB/T 5966-2012 is a recommended Chinese machinery industry standard for the mechanical seals fitted to submersible pumps.
It fixes the structural types of the seal, its operating parameters, the material codes and the layout arrangements, and then the technical requirements, the test methods, the instructions for installation and use, and the packaging, labelling and storage.
The scope clause names the seals to which these provisions apply. It quotes GB/T 1184-1996, GB/T 10444, GB/T 14211, JB/T 4127.1, JB/T 6374, JB/T 7757.2, JB/T 8871, JB/T 8872 and JB/T 11107.
It replaces JB/T 5966-1995. Chinese classification J22 and international classification 21.140 are recorded, under the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 5966-2012
National Standard of the People's Republic of China
- ICS
- 21.140
- Replacing
- JB/T 5966-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 5966-2012 was issued by MIIT on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition JB/T 5966-1995.
2 Scope
This standard is a recommended Chinese machinery industry standard for the mechanical seals fitted to submersible pumps. It fixes the structural types of the seal, its operating parameters, the material codes and the layout arrangements, and then the technical requirements, the test methods, the instructions for installation and use, and the packaging, labelling and storage. The scope clause names the seals to which these provisions apply. It quotes GB/T 1184-1996, GB/T 10444, GB/T 14211, JB/T 4127.1, JB/T 6374, JB/T 7757.2, JB/T 8871, JB/T 8872 and JB/T 11107. It replaces JB/T 5966-1995. Chinese classification J22 and international classification 21.140 are recorded, under the Ministry of Industry and Information Technology.
3 Normative references
JB/T 5966-2012 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 10444
GB/T 14211
JB/T 4127.1
JB/T 6374
JB/T 7757.2
JB/T 8871
JB/T 8872
JB/T 11107
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5966-1995 (earlier edition)
6 Classification and status
International classification (ICS): 21.140
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 10444Method of type establishment for mechanical seals
- GB/T 14211Test method of mechanical seal
- JB/T 4127.1Mechanical Seal - Part 1: Specification
- JB/T 6374Silicon carbide sealing rings for mechanical seals - Technical requirements
- JB/T 7757.2Rubber O-rings for mechanical seals
Similar standards
Editions of JB/T 5966
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5966-2012 | Mechanical seal of submersible pumps | current edition | Current |
| JB/T 5966-1995 | Mechanical seal of submersible pumps | previous edition | Superseded |
This page sells the current edition, JB/T 5966-2012. Earlier editions are listed for reference only.
How to Download JB/T 5966-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10444-2024 — Method of type establishment for mechanical seals
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 14211-2019 — Test method of mechanical seal
Secure payment via Stripe
Payments accepted
JB/T 5966-2012
$165.00