Valid

JB/T 5941-1991Construction machinery - General technical specifications for non-ferrous alloy castings (English PDF)

工程机械 有色合金铸件通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5941-1991 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 12, 1991

Implementation date

July 1, 1992

Scope

JB/T 5941-1991 is the English-translated version of 工程机械 有色合金铸件通用技术条件.

JB/T 5941-1991 is the Chinese standard "Construction machinery - General technical specifications for non-ferrous alloy castings". Its scope clause reads: This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage, etc. of non-ferrous alloy in engineering machinery products.

This standard is applicable to sand, metallic or investment copper-based, aluminum-based or zinc-based alloy castings. Its clauses include subject content and application scope; technical requirements.

Found what you need?

Document preview — JB/T 5941-1991

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Subject Content and Application Scope
  • 2 Normative References
  • 3 Technical Requirements
  • 4 Test Methods
  • 5 Inspection Rules
  • 6 Marking, Packing, Transportation and Storage
  • Annex A (Informative) Heat Treatment of Casting Aluminum Alloys
  • Annex B (Informative) Pattern Draft of Castings
  • Annex C (Additional) Machining Allowances of Castings
  • Annex D (Additional) Mass Tolerances of Castings
  • 3.1 Casting Classification
  • 3.1.2 Example of casting label

1 Subject Content and Application Scope

This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage, etc. of non-ferrous alloy in engineering machinery products.

This standard is applicable to sand, metallic or investment copper-based, aluminum-based or zinc-based alloy castings.

2 Normative References

GB 8063 Designation of Cast Nonferrous Metals and Their Alloys

GB 1198 Methods for Chemical Analysis of Aluminum

GB 6987 Methods for Chemical Analysis of Aluminum Bronze

GB 1173 Casting Aluminum Alloys

GB 8002 Methods for Chemical Analysis of Tin Bronze

GB 5122.1~5122.20 Methods for Chemical Analysis of Brass

GB 228 Tensile Test Method for Metal

GB 231 Metallic Materials - Brinell Hardness Test

GB 2828 Sampling Procedures and Tables for Lot-by-lot Inspection by Attributes (Apply to Inspection of Successive Lots or Batches)

3 Technical Requirements

3.1 Casting Classification

3.1.1

Castings are classified into three types according to working conditions, purposes and hazard degrees caused by damage, and shall be indicated in figures and relevant technical documents. The unindicated casting type is considered as Type 3.

Type 1 casting: key casting bearing working conditions such as large dynamic load, static load and alternate load or that endangering the safe operation of main machine where damaged.

Type 2 casting: important casting bearing medium static load and dynamic load or that endangering the normal operation of component where damaged.

Type 3 casting: general-purpose light-load casting.

3.1.2 Example of casting label

Figure label of casting covers alloy designation or code, casting method, supply state, casting type and code of this standard.

Example of label:

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 5941-1991

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5941-1991

$255.00