JB/T 5727-1999Single-side woodworking thickness planers - Safety (English PDF)
单面木工压刨床 安全
This is a limited preview
Buy now to download the full PDF (38 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5727-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 8, 1999
Implementation date
March 1, 2000
Scope
JB/T 5727-1999 is the English-translated version of 单面木工压刨床 安全.
JB/T 5727-1999 is the Chinese machinery industry standard for the safety of single side woodworking thickness planers, the machines that dress one face of a board with a rotating cutterblock.
It gives the technical requirements for safety and the test methods used to check them, and it applies to thickness planers of the single side type. The Chinese classification entry is J65 and the international one is 79.120.01, the headings for woodworking machinery.
Among the standards quoted are GB/T 3766-1983, GB/T 9239-1988, GB/T 14775-1993, GB/T 15706.1-1995, JB/T 3377-1992, JB/T 5720-1991 and JB/T 6113-1992. It replaced JB 5727-1991, and was issued on 8 October 1999, applying since 1 March 2000.
Found what you need?
Document preview — JB/T 5727-1999
National Standard of the People's Republic of China
- ICS
- 79.120.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5727-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 8 October 1999 and has been in force since 1 March 2000.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 38 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for the safety of single side woodworking thickness planers, the machines that dress one face of a board with a rotating cutterblock. It gives the technical requirements for safety and the test methods used to check them, and it applies to thickness planers of the single side type. The Chinese classification entry is J65 and the international one is 79.120.01, the headings for woodworking machinery. Among the standards quoted are GB/T 3766-1983, GB/T 9239-1988, GB/T 14775-1993, GB/T 15706.1-1995, JB/T 3377-1992, JB/T 5720-1991 and JB/T 6113-1992. It replaced JB 5727-1991, and was
JB/T 5727-1999 falls under ICS 79.120.01, in the field of wood technology.
This catalogue holds 60 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels
GB/T 3766-1983 — Hydraulic fluid power--General rules for the application of equipment to transmission and control systems
GB/T 3768-1996 — Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GB/T 5226.1-1995
GB/T 7932-1987 — Pneumatic fluid power--General rules for the application of equipment to transmission and control systems
GB/T 9239-1988 — Balance quality of rigid rotors--Determination of permissible residual unbalance
GB 12257-2000 — General specification of He-Ne laser medical equipment
GB/T 14385-1993 — Woodworking machines. Thickness planing machines with rotary cutterblock for one side dressing. Accuracy tests
GB/T 14775-1993 — General ergonomics requirements for controller
GB/T 15377-1994 — Woodworking machines--Planing machines--Terminology
GB/T 15379-1994 — Terminology for woodworking machines. Basic terminology
GB/T 15706.1-1995 — Safety machinery--Basic, concept, general principles for design--Part 1: Basic terminology, methodology
GB/T 15706.2-1995 — Safety of machinery--Basic concept, general principles for design. Part 2: Technical principles and specifications
GB/T 16755-1992
JB/T 3377-1992 — Woodworking machine straight blade planer cutter
JB/T 5720-1991
JB/T 6113-1992 — Cutting tools for woodworking machines - Safety technical specifications
JB/T 9935-1999 — Machine tool accessories - Preparation of accompanying technical documents
EN 1088-1995
4 Where this standard sits
It cites 19 standards, among them GB/T 699-1999, GB/T 3766-1983, GB/T 3768-1996, listed in full above.
One other standard in this catalogue cites it: JB/T 6555.3-2012.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 38 pages
6 Classification and status
International classification (ICS): 79.120.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 38 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 699-1999Quality carbon structure steels
- GB/T 3766-1983Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 3768-1996Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 5226.1-1995Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
- GB/T 7932-1987Pneumatic fluid power -- General rules and safety requirements for systems and their components
- GB/T 9239-1988Balance quality of rigid rotors--Determination of permissible residual unbalance
JB/T 5720-1991 · EN 1088-1995
Similar standards
How to Download JB/T 5727-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12257-2000 — General specification of He-Ne laser medical equipment
GB/T 14385-1993 — Woodworking machines. Thickness planing machines with rotary cutterblock for one side dressing. Accuracy tests
GB/T 14775-1993 — General ergonomics requirements for controller
JB/T 5727-1999
$909.00