JB 6112-1992Two-side, three-side and four-side woodworking planers and moulders - Structural safety (English PDF)
二、三、四面木工刨床和铣床 结构安全
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB 6112-1992 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Mandatory
Issue date
May 16, 1992
Implementation date
January 1, 1993
Scope
JB 6112-1992 is the English-translated version of 二、三、四面木工刨床和铣床 结构安全.
This standard sets out the structural safety requirements for two-side, three-side and four-side woodworking planing and milling machines. It covers the general requirements for the machine, the requirements for its guards, and the requirements for the steering and feed mechanisms.
The requirements are addressed to the construction of the machine, so that its safety is built in rather than left to the operator. The standard applies to two-, three- and four-side woodworking planers and milling machines.
Found what you need?
Document preview — JB 6112-1992
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Overview
- 4.1 General requirements
- 5 Technical Requirements
- 6 Calibration conditions
- 6.1 Environmental conditions
- 6.2 Measurement standards and other equipment
- 7 Calibration items and calibration methods
- 7.1 Calibration Items
- 7.2 Calibration method
- 8 Expression of calibration results
- 9 Recalibration interval
1 Foreword
JB 6112-1992 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 May 1992.
The JB prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard sets out the structural safety requirements for two-side, three-side and four-side woodworking planing and milling machines. It covers the general requirements for the machine, the requirements for its guards, and the requirements for the steering and feed mechanisms. The requirements are addressed to the construction of the machine, so that its safety is built in rather than left to the operator. The standard applies to two-, three- and four-side woodworking planers and milling machines.
JB 6112-1992 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 152 other JB standards.
Of the 12 JB standards that do carry an ICS number, 8 (67%) fall under ICS 11, in the field of health care technology.
3 Normative references
GB 9239
GB 12557
JB 4172
JB 5720
JB 6113
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters
JB/T 1647.2-2012 — Straight-side mechanical power presses - Part 2: Technical requirements
GB/T 8118-2010 — The general specification for arc welding machines
JB/T 8087-2025 — Woodworking Band Saw Blades
JB/T 5734-2025 — Four-sided woodworking milling machine
JB/T 3872-2025 — Woodworking machine drill bits
6 Classification and status
Chinese Standard Classification (CCS): J 65
Prefix JB: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
GB 9239 · JB 4172 · JB 5720 · JB 6113
Similar standards
How to Download JB 6112-1992
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB 6112-1992
$55.00