JB/T 5332.1-1991Electric submersible oil pump cables of rated voltages up to and including 3.6/6 kV - Part 1: General requirements (English PDF)
额定电压3.6/6kV 及以下电动潜油泵电缆 第一部分 一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5332.1-1991 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 28, 1991
Implementation date
July 1, 1992
Scope
JB/T 5332.1-1991 is the English-translated version of 额定电压3.6/6kV 及以下电动潜油泵电缆 第一部分 一般规定.
JB/T 5332.1-1991 is the Chinese machinery industry standard covering electric submersible oil pump cables of rated voltages up to and including 3.6/6 kV, Part 1: General requirements.
It was issued on 28 June 1991 and has been in force since 1 July 1992, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1991 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 5332.1-1991
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 5332.1-1991 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 June 1991 and has been in force since 1 July 1992.
It is one of 7 parts of the JB/T 5332 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 5332.1-1991 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 5332.2-1991 — Part 2: Lead cables for electric submersible oil pumps
JB/T 5332.2-2011 — Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 2: Motor lead cables
JB/T 5332.3-1991 — Part 3: Flat power cables for electric submersible oil pumps
JB/T 5332.3-2011 — Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 3: Flat power cables
JB/T 5332.4-1991 — Part 4: Round power cables for electric submersible oil pumps
JB/T 5332.4-2011 — Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 4: Round power cables
Other editions:
JB/T 5332.1-2011 (later edition)
Standards on related subjects:
JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 5332.2-2011Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 2: Motor lead cables
- JB/T 5332.3-2011Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 3: Flat power cables
- JB/T 5332.4-2011Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 4: Round power cables
Similar standards
How to Download JB/T 5332.1-1991
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 5332.2-2011 — Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 2: Motor lead cables
JB/T 5332.2-1991 — Electric submersible oil pump cables of rated voltages up to and including 3.6/6 kV - Part 2: Lead cables for electric submersible oil pumps
JB/T 5332.3-2011 — Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 3: Flat power cables
Secure payment via Stripe
Payments accepted
JB/T 5332.1-1991
$235.00