JB/T 5211-2008Valve components - Gate valve seats (English PDF)
阀门零部件 闸阀阀座
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5211-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 5211-2008 is the English-translated version of 阀门零部件 闸阀阀座.
JB/T 5211-2008 is one of the recommended Chinese machinery industry standards for valve components, and it treats the seats of gate valves. The document defines the structural form of the valve seat, its dimensions and its technical requirements.
The standard applies to steel gate valves, and it supersedes JB/T 5211-1991. It carries J16 as its Chinese classification and 23.060 as its international classification.
Found what you need?
Document preview — JB/T 5211-2008
National Standard of the People's Republic of China
- ICS
- 23.060
- Replacing
- JB/T 5211-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5211-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It replaces the earlier edition JB/T 5211-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is one of the recommended Chinese machinery industry standards for valve components, and it treats the seats of gate valves. The document defines the structural form of the valve seat, its dimensions and its technical requirements. The standard applies to steel gate valves, and it supersedes JB/T 5211-1991. It carries J16 as its Chinese classification and 23.060 as its international classification.
JB/T 5211-2008 falls under ICS 23.060, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 12228-2006 — General purpose industrial valves - Specification of carbon steel forgings
GB/T 12234-2007 — Bolted bonnet steel gate valves for petroleum and natural gas industries [including MODIFICATION 1]
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5211-1991 (earlier edition)
Standards on related subjects:
GB/T 8464-2023 — Cast iron, copper and stainless steel valves with screwed connections
HG/T 4304-2012 — Corrosion-resistant polyolefin (PO) plastic linings - Technical specifications
JB/T 106-2004 — Valves - Marking and painting
JB/T 1308.1-2025 — PN2500 Ultra-high pressure valve and fitting - Part 1: Valve type and basic parameter
JB/T 5210-2010 — Components of valves - Back seats
JB/T 5208-2008 — Components of valves - Lantern rings
6 Classification and status
International classification (ICS): 23.060
Chinese Standard Classification (CCS): J 16
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 12228-2006General purpose industrial valves - Technical specification for carbon steel forgings
- GB/T 12234-2007Bolted bonnet steel gate valves for petroleum and natural gas industries
Similar standards
Editions of JB/T 5211
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5211-2008 | Valve components - Gate valve seats | current edition | Current |
| JB/T 5211-1991 | Valve components - Gate valve seats | previous edition | Superseded |
This page sells the current edition, JB/T 5211-2008. Earlier editions are listed for reference only.
How to Download JB/T 5211-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12228-2006 — General purpose industrial valves - Specification of carbon steel forgings
GB/T 12234-2007 — Bolted bonnet steel gate valves for petroleum and natural gas industries [including MODIFICATION 1]
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
JB/T 5211-2008
$55.00