JB/T 4290-2011High speed tool steel forgings - Technical requirements (English PDF)
高速工具钢锻件 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4290-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 4290-2011 is the English-translated version of 高速工具钢锻件 技术条件.
JB/T 4290-2011 is a recommended Chinese machinery industry standard giving the technical requirements for high speed tool steel forgings. Besides those requirements it provides the test methods, the inspection rules, and the marking and quality documents for the forgings.
The products it applies to are tool forgings of high speed tool steel made by drawing out, or by repeated upsetting and drawing out. Forgings of new high speed tool steels other than the grades named in the standard may also be handled by reference to it.
Among the standards it quotes are GB/T 224, GB/T 230.1, GB/T 1814, GB/T 9943 and JB/T 4009. Its Chinese classification is J32 and its international classification 77.140.85. It replaces JB/T 4290-1999.
Found what you need?
Document preview — JB/T 4290-2011
National Standard of the People's Republic of China
- ICS
- 77.140.85
- Replacing
- JB/T 4290-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 4290-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.
It replaces the earlier edition JB/T 4290-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the technical requirements for high speed tool steel forgings. Besides those requirements it provides the test methods, the inspection rules, and the marking and quality documents for the forgings. The products it applies to are tool forgings of high speed tool steel made by drawing out, or by repeated upsetting and drawing out. Forgings of new high speed tool steels other than the grades named in the standard may also be handled by reference to it. Among the standards it quotes are GB/T 224, GB/T 230.1, GB/T 1814, GB/T 9943 and JB/T 4009. Its Chinese classification is J32 and its international classification 77.140.85. It replaces JB/T 4290-1999.
JB/T 4290-2011 falls under ICS 77.140.85, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 224
GB/T 230.1
GB/T 231.1
GB/T 1814
GB/T 9943
JB/T 4009
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 4290-1999 (earlier edition)
Standards on related subjects:
GB/T 12362-2016 — Steel die forgings - Tolerance and machining allowance
GB/T 12361-2016 — Steel die forgings - General specification
JB/T 4129-1999 — Burr height of stampings
JB/T 7025-2018 — Rotor and shaft forgings for 25 MW steam turbine and below - Technical specification
JB/T 6398-2018 — Heavy stainless acid resistant steel and heat resistant steel forgings - Technical specification
JB/T 4010-2018 — Ultrasonic testing for steel retaining rings of turbine generator
6 Classification and status
International classification (ICS): 77.140.85
Chinese Standard Classification (CCS): J 32
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 224Determination of the depth of decarburization of steels
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 231.1Metallic materials - Brinell hardness test - Part 1: Test method
- GB/T 1814Inspection method for steel work fractures
- GB/T 9943High-speed tool steels
- JB/T 4009Non-destructive testing - Test method for ultrasonic testing and evaluation of discontinuities by contact pulse-echo longitudinal waves
Similar standards
Editions of JB/T 4290
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4290-2011 | High speed tool steel forgings - Technical requirements | current edition | Current |
| JB/T 4290-1999 | High speed tool steel forgings - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 4290-2011. Earlier editions are listed for reference only.
How to Download JB/T 4290-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1814-1979 — Inspection method for steel work fractures
GB/T 224-1987 — Determination of depth of decarburization of steel
GB/T 224-2008 — Determination of depth of decarburization of steels
JB/T 4290-2011
$225.00