JB/T 13649.1-2019Interfaces between high-speed tool shanks and machine tool spindles - Part 1: Specifications for hollow taper (HSK) interfaces with flange contact surface (English PDF)
高速刀柄与机床主轴接口 第1部分：带有法兰接触面的空心圆锥（HSK）接口技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13649.1-2019 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 2, 2019
Implementation date
January 1, 2020
Scope
JB/T 13649.1-2019 is the English-translated version of 高速刀柄与机床主轴接口 第1部分：带有法兰接触面的空心圆锥（HSK）接口技术规范.
JB/T 13649.1-2019 is the first part of the Chinese machinery industry standard on the interface between machine tool spindles and high-speed tool shanks.
It gives the technical requirements for joining the spindle to a hollow taper shank of the HSK type with a flange contact surface: the interface types and mounting dimensions, the marking, the heat treatment, the appearance, the mating surface of the mounting, the clamping, the static stiffness and the accuracy inspection.
The part is written for the spindle interface of high-speed numerically controlled machine tools used for milling, boring and drilling. It quotes GB/T 13574-1992, GB/T 17421.1-1998, GB/T 19449.1-2004, GB/T 19449.2-2004, GB/T 25375-2010, DIN 69063-2-2003, DIN 69063-5-2012 and DIN 69063-6-2003. Issued on 2 May 2019, it has applied since 1 January 2020.
Found what you need?
Document preview — JB/T 13649.1-2019
National Standard of the People's Republic of China
- ICS
- 25.080.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 13649.1-2019 was issued by MIIT on 2 May 2019.
It is one of 2 parts of the JB/T 13649 series.
2 Scope
This standard is the first part of the Chinese machinery industry standard on the interface between machine tool spindles and high-speed tool shanks. It gives the technical requirements for joining the spindle to a hollow taper shank of the HSK type with a flange contact surface: the interface types and mounting dimensions, the marking, the heat treatment, the appearance, the mating surface of the mounting, the clamping, the static stiffness and the accuracy inspection. The part is written for the spindle interface of high-speed numerically controlled machine tools used for milling, boring and drilling. It quotes GB/T 13574-1992, GB/T 17421.1-1998, GB/T 19449.1-2004, GB/T 19449.2-2004, GB/T 25375-2010, DIN 69063-2-2003, DIN 69063-5-2012 and DIN 69063-6-2003.
3 Normative references
JB/T 13649.1-2019 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 13574-1992 — Metal-cutting machine tools--Test code for static rigidity
GB/T 17421.1-1998
GB/T 19449.1-2004 — Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions
GB/T 19449.2-2004 — Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions
GB/T 25375-2010 — Metal-cutting machine tools - Check and evaluation for combine surface by miniating
DIN 69063-2-2003
DIN 69063-5-2012
DIN 69063-6-2003
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 13649.2-2019 — Part 2: Specifications for non-rotating tool spindle interfaces for hollow taper (HSK) with flange contact surface
6 Classification and status
International classification (ICS): 25.080.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 13574-1992Metal-cutting machine tools--Test code for static rigidity
- GB/T 17421.1-1998Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
- GB/T 19449.1-2004Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions
- GB/T 19449.2-2004Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions
- GB/T 25375-2010Metal-cutting machine tools - Check and evaluation for combine surface by miniating
DIN 69063-2-2003 · DIN 69063-5-2012 · DIN 69063-6-2003
Similar standards
How to Download JB/T 13649.1-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13574-1992 — Metal-cutting machine tools--Test code for static rigidity
GB/T 19449.1-2004 — Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions
GB/T 19449.2-2004 — Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions
Secure payment via Stripe
Payments accepted
JB/T 13649.1-2019
$105.00