Valid

JB/T 3045-2008Drilling and boring modular machine tools - Testing of the accuracy (English PDF)

钻镗组合机床 精度检验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 3045-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 3045-2008 is the English-translated version of 钻镗组合机床 精度检验.

JB/T 3045-2008 is a recommended Chinese machinery industry standard on the accuracy of drilling and boring modular machine tools. It specifies the accuracy requirements for these machines and the methods by which that accuracy is inspected.

It applies to drilling and boring modular machine tools fitted with a guide that carry out drilling, counterboring, reaming, boring and similar operations, and it notes that additional provisions may be set where there are special requirements.

It supersedes JB/T 3045-1991 and quotes GB/T 17421.1-1998. It is catalogued as J58 and 25.080.99.

Found what you need?

Document preview — JB/T 3045-2008

National Standard of the People's Republic of China

ICS
25.080.99
Replacing
JB/T 3045-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 3045-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.

It replaces the earlier edition JB/T 3045-1991.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard on the accuracy of drilling and boring modular machine tools. It specifies the accuracy requirements for these machines and the methods by which that accuracy is inspected. It applies to drilling and boring modular machine tools fitted with a guide that carry out drilling, counterboring, reaming, boring and similar operations, and it notes that additional provisions may be set where there are special requirements. It supersedes JB/T 3045-1991 and quotes GB/T 17421.1-1998. It is catalogued as J58 and 25.080.99.

JB/T 3045-2008 falls under ICS 25.080.99, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions

4 Where this standard sits

It cites one other standard, GB/T 17421.1-1998, listed in full above.

One other standard in this catalogue cites it: JB/T 3048-2008.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

JB/T 3045-1991 (earlier edition)

Standards on related subjects:

JB/T 12396-2015 — Proportional valve solenoids

GB 16454-2008 — Sawing machines for metal cutting -- Safeguarding specifications

JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements

JB/T 3040-2011 — Drilling head of modular machine tools - Testing of the accuracy

JB/T 3039-2011 — Boring head of modular machine tools - Testing of the accuracy

JB/T 3038-2011 — Milling head of modular machine tools - Testing of the accuracy

7 Classification and status

International classification (ICS): 25.080.99

Chinese Standard Classification (CCS): J 58

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 3045

EditionTitleRevisionStatus
JB/T 3045-2008Drilling and boring modular machine tools - Testing of the accuracycurrent editionCurrent
JB/T 3045-1991Drilling and boring modular machine tools - Testing of the accuracyprevious editionSuperseded

This page sells the current edition, JB/T 3045-2008. Earlier editions are listed for reference only.

How to Download JB/T 3045-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 3045-2008

$195.00