JB/T 20075-2013Micronizing Pharmaceutical Vibrating Mill (English PDF)
振动式药物超微粉碎机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20075-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 20075-2013 is the English-translated version of 振动式药物超微粉碎机.
JB/T 20075-2013 is the recommended Chinese machinery industry standard for the micronizing pharmaceutical vibrating mill, the vibration mill used to reduce medicinal material to a very fine powder.
It fixes the terms and definitions for this equipment, its classification and its model marking, the requirements the machine has to meet, the test methods used to check them, and the inspection rules applied to the results.
The closing provisions deal with the signs carried by the machine, the instructions supplied with it, and packaging, transport and storage. The equipment it addresses is the vibrating mill for pharmaceutical use.
It quotes GB/T 191, GB 5226.1-2008, GB/T 9969, GB/T 16769 and YY/T 0216-1995, and it replaces the earlier edition JB/T 20075-2005.
Found what you need?
Document preview — JB/T 20075-2013
National Standard of the People's Republic of China
- ICS
- 11.120.30
- Replacing
- JB/T 20075-2005
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 20075-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 20075-2005.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for the micronizing pharmaceutical vibrating mill, the vibration mill used to reduce medicinal material to a very fine powder. It fixes the terms and definitions for this equipment, its classification and its model marking, the requirements the machine has to meet, the test methods used to check them, and the inspection rules applied to the results. The closing provisions deal with the signs carried by the machine, the instructions supplied with it, and packaging, transport and storage. The equipment it addresses is the vibrating mill for pharmaceutical use. It quotes GB/T 191, GB 5226.1-2008, GB/T 9969, GB/T 16769 and YY/T 0216-1995, and it replaces the earlier edition JB/T 20075-2005.
JB/T 20075-2013 falls under ICS 11.120.30, in the field of health care technology.
This catalogue holds 125 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 9969
GB/T 10111
GB/T 16769
GB/T 24342-2009 — Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications
GB/T 13306
GB/T 13384
WM/T 2-2004 — Green standards of medicinal plants and preparations for foreign trade and economy
NY/T 1677-2008 — Determination of sporoderm-broken rate of Ganoderma spore product
YY/T 0216-1995 — Method for compiling model designations of pharmaceutical machinery products
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 20075-2005 (earlier edition)
Standards on related subjects:
GB/T 36030-2018 — General technical requirements of CIP and SIP for pharmaceutical machinery
JB/T 20032-2012 — Series vacuum freezing dryer for pharmaceutics
JB/T 20104-2007 — Tablet hardness testers
JB/T 20207-2024 — Dispensing equipment for Chinese medicine formula granules
JB/T 20052-2021 — Variable frequency winnowing machines
JB/T 20085-2014 — Tunnel microwave dryers
6 Classification and status
International classification (ICS): 11.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 10111Generation of random numbers and procedures applied to sampling inspection for product quality
- GB/T 16769Metal-cutting machine tools -- Measurement method of sound pressure level
Editions of JB/T 20075
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 20075-2013 | Micronizing Pharmaceutical Vibrating Mill | current edition | Current |
| JB/T 20075-2005 | Micronizing Pharmaceutical Vibrating Mill | previous edition | Superseded |
This page sells the current edition, JB/T 20075-2013. Earlier editions are listed for reference only.
How to Download JB/T 20075-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10111-1988 — Methods for random sampling by utilizing dices of random number
GB/T 10111-2008 — Generation of random numbers and procedures applied to sampling inspection for product quality
JB/T 20075-2013
$165.00