JB/T 20020-2004Rotary tablet presses (English PDF)
旋转式压片机
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20020-2004 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 2004
Implementation date
January 1, 2004
Scope
JB/T 20020-2004 is the English-translated version of 旋转式压片机.
JB/T 20020-2004 is the recommended Chinese machinery industry standard for rotary tablet presses used in pharmaceutical production.
It sets out the terms and definitions, the classification and model marking, the requirements, the test methods and the inspection rules for the press, and closes with the provisions on signs, instruction brochure, packaging and storage.
Its scope is the continuously rotating type of tablet press, limited to machines whose turret die-hole centre line speed stays below 60 m/min. The text quotes GB/T 191, GB/T 1184-1996, GB/T 1800.4-1999, GB/T 3766, GB 5226.1-2002, GB/T 6388, GB/T 7935, GB/T 9969.1, GB/T 13306, GB/T 13384 and GB/T 16769.
It took the place of the earlier medical device standard YY 0221-1995. It was issued on 1 January 2004.
Found what you need?
Document preview — JB/T 20020-2004
National Standard of the People's Republic of China
- ICS
- 11.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 20020-2004 is issued by Ministry of Industry and Information Technology of the People's Republic of China.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 16 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for rotary tablet presses used in pharmaceutical production. It sets out the terms and definitions, the classification and model marking, the requirements, the test methods and the inspection rules for the press, and closes with the provisions on signs, instruction brochure, packaging and storage. Its scope is the continuously rotating type of tablet press, limited to machines whose turret die-hole centre line speed stays below 60 m/min. The text quotes GB/T 191, GB/T 1184-1996, GB/T 1800.4-1999, GB/T 3766, GB 5226.1-2002, GB/T 6388, GB/T 7935, GB/T 9969.1, GB/T 13306, GB/T 13384 and GB/T 16769. It took the place of the earlier medical device standard YY 0221-1995. It was issued on 1 January 2004.
JB/T 20020-2004 falls under ICS 11.120.30, in the field of health care technology.
This catalogue holds 125 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.4-1999 — General rules for roler sanders
GB/T 3766
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 7935
GB/T 9969.1
GB/T 13306
GB/T 13384
GB/T 16769
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
5 Classification and status
International classification (ICS): 11.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.4-1999Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB 5226.1-2002Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
GB/T 9969.1
Similar standards
How to Download JB/T 20020-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13306-1991 — Plates
JB/T 20020-2004
$309.00