Valid

JB/T 20022-2017Punches and dies for ZP series tablet presses (English PDF)

ZP系列压片机药片冲模

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 20022-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 12, 2017

Implementation date

October 1, 2017

Scope

JB/T 20022-2017 is the English-translated version of ZP系列压片机药片冲模.

JB/T 20022-2017 is the Chinese standard "Punches and dies for ZP series tablet presses". Its scope clause reads: This standard specifies the terms and definitions, labels, requirements, test methods, inspection rules, packaging and Storage.

This standard applies to ZP series tablets tablet die (hereinafter referred to as "Die"). Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 20022-2017

National Standard of the People's Republic of China

Replacing
JB 20022-2004

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Punching punchanddie

1 Scope

This standard specifies the terms and definitions, labels, requirements, test methods, inspection rules, packaging and

Storage.

This standard applies to ZP series tablets tablet die (hereinafter referred to as "Die").

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1184 shape and location tolerances are not tolerance values

GB/T 1800.2 Geometrical Product Specifications (GPS) Limits and Matching Part 2. Standard Tolerance Levels and Bore and Shaft Limit Deviation

Bad table

GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances

GB/T 2828.1-2003 Sampling procedures for sampling inspection - Part 1. Batch-by-lot inspection sampling by reception quality limit (AQL) plan

GB/T 13384 mechanical and electrical product packaging General technical conditions

JB/T 20080.1-2006 high speed tabletting die (T series) size and shape

High speed tabletting die - Inspection

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Punching punchanddie

On the red bar, under the punch and the mold collectively.

see picture 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 20022

EditionTitleRevisionStatus
JB/T 20022-2017Punches and dies for ZP series tablet pressescurrent editionCurrent
JB 20022-2004Punches and dies for ZP series tablet pressesprevious editionSuperseded

This page sells the current edition, JB/T 20022-2017. Earlier editions are listed for reference only.

How to Download JB/T 20022-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 20022-2017

$205.00