Valid

JB/T 20080-2019T series tablet press tooling (English PDF)

T系列压片冲模

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for JB/T 20080-2019 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 2, 2019

Implementation date

January 1, 2020

Scope

JB/T 20080-2019 is the English-translated version of T系列压片冲模.

JB/T 20080-2019 is the Chinese standard "T series tablet press tooling". Its scope clause reads: This standard specifies the terms and definitions, composition, marking, requirements, test methods, inspection rules, packaging and storage of T series tablet die.

This standard applies to T series tablet die (hereinafter referred to as die). Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 20080-2019

National Standard of the People's Republic of China

ICS: 11.120.30
Replacing: JB/T 20080.1-2006

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Composition
5 Mark
6 Requirements
7 Test method
8 Inspection rules
9 Packaging and storage
Appendix B (informative appendix) Dust collecting ring structure installed on the upper punch
Appendix C (informative appendix) Design of the groove in the middle mold
Appendix D (informative appendix) Common structure and dimensions of navigation keys
Appendix F (Normative Appendix) Technical indicators of the standard bisecting line of tablets
References

1 Scope

This standard specifies the terms and definitions, composition, marking, requirements, test methods, inspection rules, packaging and storage of T series tablet die.

This standard applies to T series tablet die (hereinafter referred to as die).

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 1184 shape and position tolerance without tolerance value

GB/T 1800.2 Geometric Technical Specifications for Products (GPS) Limits and Fits Part 2.Standard Tolerance Classes and Limit Deviations of Holes and Shafts

Difference table

GB/T 1804 General Tolerances Tolerances of linear and angular dimensions without tolerances

GB/T 2828.1-2012 Sampling inspection procedures by attributes Part 1.Batch inspection sampling searched by acceptance quality limit (AQL) plan

GB/T 13384 General technical conditions for packaging of mechanical and electrical products

GB/T 36033-2018 Tablet press die inspection

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Punchanddie

The collective term for upper punch, lower punch and middle mold.

[GB/T 36033-2018, definition 3.1]

3.2 Roundtablet

The outer side of the tablet is a round tablet.

see picture 1.

3.3 Shaped tablet

The outer side of the tablet is a non-circular tablet.

See Figure 2.

3.4 Sheet profile

The lamella shape of the tablet.

See Figure 3.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 30748-2014|YY 0221-1995|GB/T 9653-2006

Editions of JB/T 20080

Edition	Title	Revision	Status
JB/T 20080-2019	T series tablet press tooling	current edition	Current
JB/T 20080.1-2006	T series tablet press tooling	previous edition	Superseded

This page sells the current edition, JB/T 20080-2019. Earlier editions are listed for reference only.

How to Download JB/T 20080-2019

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.