GB/T 36033-2018Press tools for tablets—Inspecting (English PDF)
压片冲模 检测
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36033-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 15, 2018
Implementation date
October 1, 2018
Scope
GB/T 36033-2018 is the English-translated version of 压片冲模 检测.
GB/T 36033-2018 is the Chinese standard for inspecting the press tools of tablet presses, that is the upper punch, lower punch and middle die used in pharmaceutical tableting.
It specifies the test methods for these punches and dies and applies to the inspection of these tools, referred to in the text simply as dies.
Hardness is checked with the Rockwell method of GB/T 230.1, which it cites as a normative reference, and the document defines the punch and die set as the collective name of the three parts, shown in a figure.
It was prepared under the national pharmaceutical equipment committee and is meant for makers and users of tablet press tooling. It was issued on 15 March 2018 and has applied since 1 October 2018.
Found what you need?
Document preview — GB/T 36033-2018
National Standard of the People's Republic of China
- ICS
- 11.120.30
- Classification
- C 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the test method for tableting dies.
This standard applies to the test of the punch die (hereinafter referred to as die).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 230.1 Rockwell hardness test for metallic materials - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T scales)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Punch and die
The collective name of the upper punch, the lower punch and the middle mold. see picture 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36033-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 230.1-2004 — Metallic Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
GB/T 230.1-2009 — Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
GB/T 230.1-2018 — Metallic materials - Rockwell hardness test - Part 1: Test method
Secure payment via Stripe
Payments accepted
GB/T 36033-2018
$235.00