JB/T 13597-2018Electric valve actuators for low temperature environments - Technical requirements (English PDF)
低温环境用阀门电动装置 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13597-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 21, 2018
Implementation date
October 1, 2019
Scope
JB/T 13597-2018 is the English-translated version of 低温环境用阀门电动装置 技术条件.
Valve electric actuators intended for low-temperature environments are dealt with in JB/T 13597-2018. The standard gives the classification and types of these actuators, the technical requirements, the test methods and the inspection rules, and the provisions for marking, packaging, transport and storage.
It applies to ordinary, intelligent and explosion-proof valve electric actuators working at ambient temperatures from -65 °C to 30 °C; for other working temperatures, buyer and seller may use the standard as a reference.
Issued on 21 December 2018 by the Ministry of Industry and Information Technology, it took effect on 1 October 2019.
Found what you need?
Document preview — JB/T 13597-2018
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 13597-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 21 December 2018 and has been in force since 1 October 2019.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 13597-2018 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB/T 13927-2022 — Industrial valves - Pressure testing
GB/T 13932-2016 — Cast iron swing check valves
JB/T 106-2004 — Valves - Marking and painting
JB/T 13600-2018 — Double-seal butterfly valves for hydraulic turbine inlets
JB/T 13599-2018 — Gas liquid drain valves
JB/T 13598-2018 — Gas-over-oil valve actuators - Technical requirements
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 13597-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 13597-2018
$120.00