JB/T 13601-2018Hydraulic valve actuators - Technical requirements (English PDF)
液压驱动装置 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13601-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 21, 2018
Implementation date
October 1, 2019
Scope
JB/T 13601-2018 is the English-translated version of 液压驱动装置 技术条件.
JB/T 13601-2018 covers hydraulic drive units for part-turn valves. The machinery industry standard gives terms and definitions, the classification and structural types, the technical requirements, the test methods and the inspection rules, and deals with marking, packaging, protection and storage.
It applies to drive units with a nominal torque below 1 750 000 N·m, working at an ambient temperature from 0 °C to 60 °C and an ambient humidity of no more than 90 % at 25 °C, in an environment free of flammable, explosive or conductive dust and of corrosive gases. The standard was issued on 21 December 2018 and took effect on 1 October 2019.
Found what you need?
Document preview — JB/T 13601-2018
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 13601-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 21 December 2018 and has been in force since 1 October 2019.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 13601-2018 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB/T 13927-2022 — Industrial valves - Pressure testing
GB/T 13932-2016 — Cast iron swing check valves
JB/T 106-2004 — Valves - Marking and painting
JB/T 13599-2018 — Gas liquid drain valves
JB/T 13598-2018 — Gas-over-oil valve actuators - Technical requirements
JB/T 13597-2018 — Electric valve actuators for low temperature environments - Technical requirements
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 13601-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 13601-2018
$255.00