Valid

JB/T 13216-2017AC spindle servo motors for numerical control system of industrial machines (English PDF)

工业机械数字控制系统用交流主轴伺服电动机

Preview PDF

This is a limited preview

Buy now to download the full PDF (31 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13216-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 12, 2017

Implementation date

January 1, 2018

Scope

JB/T 13216-2017 is the English-translated version of 工业机械数字控制系统用交流主轴伺服电动机.

JB/T 13216-2017 is the Chinese standard "AC spindle servo motors for numerical control system of industrial machines". Its scope clause reads: This standard specifies the technical requirements and the inspection (test) methods for the manufacture and the acceptance of AC spindle servo motors for the numerical control systems of industrial machines.

It applies to AC spindle servo motors for the numerical control systems of industrial machines, hereinafter referred to as spindle motors; AC spindle servo motors for other similar uses may follow it for reference.

The AC spindle servo motor referred to in this standard is an AC asynchronous spindle motor.

Found what you need?

Document preview — JB/T 13216-2017

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references
3 Terms and definitions
4 Design and manufacture
5 Safety and performance
6 Accompanying documents
7 Packaging, storage and transport
8 Test conditions and inspection rules
9 Quality guarantee period and user service
Annex A (informative) Characteristic curves of the spindle motors
Bibliography
Figure 1 Basic shape and mounting dimensions
Figure 2 Example of a test stand for a spindle motor
Table 1 Meaning of the symbols for the mounting dimensions
Table 2 Tolerance requirements for the basic dimensions
Table 3 Axial clearance
Table 4 Radial run-out of the shaft extension
Table 5 Radial run-out of the flange spigot with respect to the axis of the spindle motor
Table 6 Axial run-out of the mounting fit end face with respect to the axis of the spindle motor
Table 7 Test voltage for the voltage withstand test
Table 8 Leakage current in the voltage withstand test
Table 9 Provisions for the continuity of the protective bonding circuit
Table 10 Limits of severity for the mechanical self-vibration test
Table 11 Limits of conducted disturbance
Table 12 Limits of radiated disturbance
Table 13 Parameters of the life test
Table 14 Inspection items
Table A.1 Characteristic curves of some spindle motors

1 Scope

This standard specifies the technical requirements and the inspection (test) methods for the manufacture and the acceptance of AC spindle servo motors for the numerical control systems of industrial machines.

It applies to AC spindle servo motors for the numerical control systems of industrial machines, hereinafter referred to as spindle motors. AC spindle servo motors for other similar uses may follow it for reference.

Note: the AC spindle servo motor referred to in this standard is an AC asynchronous spindle motor.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition, including any amendments, applies.

GB/T 191-2008 Packaging - Pictorial marking for handling of goods

GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test A: Cold

GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test B: Dry heat

GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

GB/T 2423.16-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test J and guidance: Mould growth

GB/T 2423.17-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ka: Salt mist

GB/T 2900.26-2008 Electrotechnical terminology - Control motors

GB 4824-2013 Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

GB 5226.1-2008 Safety of machinery - Electrical equipment of machines - Part 1: General requirements

GB/T 10068-2008 Mechanical vibration of machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

GB/T 10069.1-2006 Measurement of airborne noise emitted by rotating electrical machines and determination of noise limits - Part 1: Method for the measurement of noise

GB/T 19678-2005 Preparation of instructions - Structuring, content and presentation

GB/T 25636-2010 Numerical control systems of machine tools - Guide to user service

JB/T 8162-2016 Packaging of control motors - Specification

3 Terms and definitions

The terms and definitions given in GB/T 2900.26-2008 and the following apply to this document.

3.1 AC spindle servo motor: a servo motor used for the spindle of a machine, which is able to servo-control position, speed and power (torque).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 31 pages — is available in the English PDF.

Similar standards

JB/T 11991-2014|JB/T 13217-2017|JB/T 13218-2017|GB/T 40329-2021|GB/T 29482.1-2013|GB/T 26220-2010

How to Download JB/T 13216-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.