JB/T 13112-2017Tempered glass covers for instruments and meters (English PDF)
仪器仪表用钢化玻璃表盖
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13112-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 12, 2017
Implementation date
January 1, 2018
Scope
JB/T 13112-2017 is the English-translated version of 仪器仪表用钢化玻璃表盖.
JB/T 13112-2017 is the recommended Chinese mechanical and machinery industry standard covering tempered glass covers used on instruments and meters. It gives the terms and definitions for this component and the specifications in which it is made, then sets the requirements and the test methods applied to them.
The standard also fixes the inspection rules and the rules for marking, packaging, transportation and storage. It is classified N05 in the Chinese system and was issued by the Ministry of Industry and Information Technology.
The standards it quotes are GB/T 2828.1-2012, GB 11614-2009, GB/T 13384-2008, GB 15763.3-2009 and GB/T 15764-2008.
Found what you need?
Document preview — JB/T 13112-2017
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 13112-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 April 2017.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese mechanical and machinery industry standard covering tempered glass covers used on instruments and meters. It gives the terms and definitions for this component and the specifications in which it is made, then sets the requirements and the test methods applied to them. The standard also fixes the inspection rules and the rules for marking, packaging, transportation and storage. It is classified N05 in the Chinese system and was issued by the Ministry of Industry and Information Technology. The standards it quotes are GB/T 2828.1-2012, GB 11614-2009, GB/T 13384-2008, GB 15763.3-2009 and GB/T 15764-2008.
JB/T 13112-2017 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB 11614-2009 — Flat glass
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB 15763.3-2009 — Safety glazing materials in building -- Part 3: Laminated glass
GB/T 15764-2008 — Standard terminology of flat glass
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 903-2019 — Colourless optical glass
GB/T 7962.2-2010 — Test methods of colourless optical glass - Part 2: Optical homogeneity - Fizeau plano-interferometry
GB/T 18459-2001 — Methods for calculating the main staticperformance specifications of transducers
JB/T 13109-2017 — Catalytic combustion gas sensor
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB 11614-2009Flat glass
- GB/T 13384-2008General specifications for packing of mechanical and electrical product
- GB 15763.3-2009Safety glazing materials in building -- Part 3: Laminated glass
- GB/T 15764-2008Standard terminology of flat glass
Similar standards
How to Download JB/T 13112-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11614-2009 — Flat glass
GB 15763.3-2009 — Safety glazing materials in building -- Part 3: Laminated glass
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
JB/T 13112-2017
$145.00