Valid

JB/T 1308.1-2011PN2500 ultra-high pressure valves and fittings - Part 1: Valve types and basic parameters (English PDF)

PN2500超高压阀门和管件 第1部分:阀门型式和基本参数

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 1308.1-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 18, 2011

Implementation date

August 1, 2011

Scope

JB/T 1308.1-2011 is the English-translated version of PN2500超高压阀门和管件 第1部分:阀门型式和基本参数.

JB/T 1308.1-2011 is the Chinese machinery industry standard covering PN2500 ultra-high pressure valves and fittings, Part 1: Valve types and basic parameters. It was issued on 18 May 2011 and has been in force since 1 August 2011, replacing JB/T 1308.1-1999.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2011 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 1308.1-2011

National Standard of the People's Republic of China

Replacing
JB/T 1308.1-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 1308.1-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.

It replaces the earlier edition JB/T 1308.1-1999.

It is one of 44 parts of the JB/T 1308 series.

2 Scope Preview

JB/T 1308.1-2011 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 1308.2-1999 — PN 250 MPa valves, fittings and fasteners - Technical specifications

JB/T 1308.2-2011 — Part 2: Valves, fittings and fasteners

JB/T 1308.2-2025 — PN2500 Ultra-high pressure valve and fitting - Part 2: Technical specification

JB/T 1308.3-1999 — PN 250 MPa pipe ends - Types, dimensions and specifications

JB/T 1308.3-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 3: Pipe ends

JB/T 1308.3-2026 — PN2500 ultrahigh pressure valves and fittings - Part 3: Flange, fasteners and connections

JB/T 1308.4-1999 — PN 250 MPa necked joints - Types, dimensions and specifications

JB/T 1308.4-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 4: Necked joints

JB/T 1308.4-2026 — PN2500 ultrahigh pressure valves and fittings - Part 4: reduced pipe

JB/T 1308.5-1999 — PN 250 MPa socket joints - Types, dimensions and specifications

JB/T 1308.5-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 5: Socket joints

JB/T 1308.6-1999 — PN 250 MPa cone gaskets and cone blind gaskets - Types, dimensions and specifications

JB/T 1308.6-2011 — Part 6: Conical gaskets and conical blind gaskets

JB/T 1308.7-1999 — PN 250 MPa threaded collars - Types, dimensions and specifications

JB/T 1308.7-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 7: Threaded collars

JB/T 1308.8-1999 — PN 250 MPa inner and outer nuts - Types, dimensions and specifications

JB/T 1308.8-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 8: Inner and outer nuts

JB/T 1308.9-1999 — PN 250 MPa joint nuts - Types, dimensions and specifications

JB/T 1308.9-2011 — Part 9: Union nuts

JB/T 1308.10-1999 — PN 250 MPa outer nuts - Types, dimensions and specifications

JB/T 1308.10-2011 — Part 10: Outer nuts

JB/T 1308.11-1999 — PN 250 MPa inner and outer threaded collars - Types, dimensions and specifications

JB/T 1308.11-2011 — Part 11: Male-female threaded collars

JB/T 1308.12-1999 — PN 250 MPa positioning rings - Types, dimensions and specifications

JB/T 1308.12-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 12: Positioning rings

JB/T 1308.13-1999 — PN 250 MPa flanges - Types, dimensions and specifications

JB/T 1308.13-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 13: Flanges

JB/T 1308.14-1999 — PN 250 MPa stud bolts - Types, dimensions and specifications

JB/T 1308.14-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 14: Stud bolts

JB/T 1308.15-1999 — PN 250 MPa stepped stud bolts - Types, dimensions and specifications

JB/T 1308.15-2011 — Part 15: Stepped stud bolts

JB/T 1308.16-1999 — PN 250 MPa nuts - Types, dimensions and specifications

JB/T 1308.16-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 16: Nuts

JB/T 1308.17-1999 — PN 250 MPa reducing pipes - Types, dimensions and specifications

JB/T 1308.17-2011 — Part 17: Reducers

JB/T 1308.18-1999 — PN 250 MPa reducing joints - Types, dimensions and specifications

JB/T 1308.18-2011 — Part 18: Reducing joints

JB/T 1308.19-1999 — PN 250 MPa equal tees and equal crosses - Types, dimensions and specifications

JB/T 1308.19-2011 — Part 19: Equal tees and equal crosses

JB/T 1308.20-1999 — PN 250 MPa reducing tees and reducing crosses - Types, dimensions and specifications

JB/T 1308.20-2011 — Part 20: Reducing tees and reducing crosses

JB/T 1308.21-1999 — PN 250 MPa elbows - Types, dimensions and specifications

JB/T 1308.21-2011 — PN 2500 ultrahigh pressure valves and fittings - Part 21: Elbows

Other editions:

JB/T 1308.1-2025 (later edition)

JB/T 1308.1-1999 (earlier edition)

Standards on related subjects:

GB/T 8464-2023 — Cast iron, copper and stainless steel valves with screwed connections

HG/T 4304-2012 — Corrosion-resistant polyolefin (PO) plastic linings - Technical specifications

JB/T 106-2004 — Valves - Marking and painting

5 Classification and status

Chinese Standard Classification (CCS): J 16

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 1308.1

EditionTitleRevisionStatus
JB/T 1308.1-2011PN2500 ultra-high pressure valves and fittings - Part 1: Valve types and basic parameterscurrent editionCurrent
JB/T 1308.1-1999PN2500 ultra-high pressure valves and fittings - Part 1: Valve types and basic parametersprevious editionSuperseded

This page sells the current edition, JB/T 1308.1-2011. Earlier editions are listed for reference only.

How to Download JB/T 1308.1-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 1308.1-2011

$129.00