JB/T 12551-2015Squeeze-casting machine (English PDF)
挤压铸造机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12551-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12551-2015 is the English-translated version of 挤压铸造机.
JB/T 12551-2015 is a recommended standard of the Chinese machinery industry devoted to the squeeze-casting machine. It sets out the terms and definitions used for the machine, its types and basic parameters, the methods for testing its accuracy, the technical requirements placed on it, the test methods that verify them, and the inspection rules.
Marking, packaging, transportation and storage close the document. Both horizontal and vertical squeeze casting machines fall within its scope. It carries the Chinese classification J61 and the international classification 25.120.30, and the Ministry of Industry and Information Technology issued it.
Among the standards it quotes are GB/T 191, GB/T 2893.2, GB 2894, GB/T 3766, GB 5083, GB/T 5226.1-2008, GB 16754, GB 20906 and JB/T 5365.1.
Found what you need?
Document preview — JB/T 12551-2015
National Standard of the People's Republic of China
- ICS
- 25.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Type and basic parameters
- 4.1 Type
- 4.2 Basic parameters
- 5 Accuracy inspection methods
- 5.1 Parallelism between the working surfaces of the moving die mounting plate and of the fixed die mounting plate
- 5.2 Parallelism between the tie bars
- 5.3 Coincidence of the axis of the pressure chamber with the axis of the extrusion piston rod
- 6 Technical requirements
- 6.1 General requirements
- 6.2 Appearance quality
- 6.3 Extrusion performance of the squeeze casting machine
- 6.4 Safety performance
- 6.5 Completeness
- 6.6 Requirements on the no-load running
- 6.7 Requirements on the load running
- 7 Test methods
- 7.1 Check of the routine items
- 7.2 Measurement of the cleanliness
- 7.3 Measurement of the maximum no-load extrusion speed
- 7.4 Measurement of the extrusion force and of the pressure build-up time
- 7.5 Measurement of the maximum metal pouring quantity
- 8 Inspection rules
- 8.1 Factory inspection
- 8.2 Type inspection
- 9 Marking, packaging, transport and storage
- Figure 1 Curve of the extrusion pressure and of the displacement against time for the extrusion system without pressure intensification
- Figure 2 Curve of the extrusion pressure and of the displacement against time for the extrusion system with pressure intensification
- Figure 3 Horizontal squeeze casting machine (example)
- Figure 4 Vertical squeeze casting machine (example)
- Figure 5 Inspection of the parallelism between the working surfaces of the moving die mounting plate and of the fixed die mounting plate
- Figure 6 Inspection of the parallelism between the tie bars
- Figure 7 Inspection of the coincidence of the axis of the pressure chamber with the piston rod of the horizontal squeeze casting machine
- Figure 8 Inspection of the coincidence of the axis of the pressure chamber with the piston rod of the vertical squeeze casting machine
What this standard covers
This standard specifies the terms and definitions, type and basic parameters, accuracy test methods, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of squeeze casting machines. This standard applies to horizontal extrusion casting machine and vertical extrusion casting machine.
Document data
International classification (ICS): 25.120.30.
Chinese classification (CCS): J61.
Estimated length of the Chinese original: 17,179 words.
Standards quoted by this document
GB/T 191; GB/T 2893.2; GB 2894; GB/T 3766; GB 5083; GB/T 5226.1-2008; GB/T 7932; GB/T 7935; GB/T 9969; GB/T 13306; GB/T 14039-2002; GB 16754; GB/T 17421.1-1998; GB 20906; GB/T 25371; JB/T 5365.1; JB/T 5365.2; JB/T 8256.1
3 Terms and definitions
4 Type and basic parameters
5 Accuracy inspection methods
6 Technical requirements
7 Test methods
8 Inspection rules
9 Marking, packaging, transport and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2893.2Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels
- GB 2894Safety colours and safety signs
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB 5083General rules for designing the production facilities in accordance with safety and health requirements
- GB/T 5226.1-2008Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
Similar standards
How to Download JB/T 12551-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 16754-1997 — Safety of machinery--Emergency stop--Principles for design
GB 16754-2008 — Safety of machinery - Emergency stop - Principles for design
GB 20906-2007 — Safety requirements for high pressure metal diecasting units
JB/T 12551-2015
$349.00