GB/T 34642-2017Continuous casting machine for aluminum ingots (English PDF)
铝锭连续铸造机组
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34642-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 34642-2017 is the English-translated version of 铝锭连续铸造机组.
GB/T 34642-2017 is the Chinese standard "Continuous casting machine for aluminum ingots". Its scope clause reads: This standard specifies the remelting aluminum ingot continuous casting machine technical requirements, test content, engineering measurement methods, inspection rules, signs, bags Loading, transportation and storage.
This standard applies to remelting aluminum ingot continuous casting unit (hereinafter referred to as continuous casting unit). Aluminum ingots, magnesium ingots, ingots and ingots and other metals Ingot casting can refer to this standard.
Found what you need?
Document preview — GB/T 34642-2017
National Standard of the People's Republic of China
- ICS
- 77.180
- Classification
- H 93
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Continuous Casting Unit General Requirements
- 4 performance requirements
- 5 assembly and installation requirements
- 6 coating requirements
- 7 Safety Requirements
- 8 test content
- 10 Inspection rules
- 11 logo, packaging, transportation, storage
- Appendix A (informative) Continuous Casting Unit Structure Figure
1 Scope
This standard specifies the remelting aluminum ingot continuous casting machine technical requirements, test content, engineering measurement methods, inspection rules, signs, bags
Loading, transportation and storage.
This standard applies to remelting aluminum ingot continuous casting unit (hereinafter referred to as continuous casting unit). Aluminum ingots, magnesium ingots, ingots and ingots and other metals
Ingot casting can refer to this standard.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 699 high-quality carbon structural steel
GB/T 706 hot-rolled steel
GB/T 710 high-quality carbon structural steel hot-rolled sheet steel and strip
GB/T 711 high-quality carbon steel hot-rolled thick steel plate and strip
GB 985.1 gas welding, welding arc welding, gas shielded welding and welding recommended groove
GB/T 1184 shape and location tolerances are not tolerance values
GB/T 1196 remelting aluminum ingots
GB/T 1243 transmission with short pitch precision roller chain, sleeve chain, accessories and sprockets
GB/T 1801 Geometrical Product Specifications (GPS) limits and tolerances and with the choice of cooperation
GB/T 3077 alloy structural steel
GB/T 3766 hydraulic drive systems and components of the general rules and safety requirements
GB/T 3768 Acoustics sound pressure method for the determination of noise source sound power level above the reflective surface using envelope measurement of surface simple method
GB 5083 General safety and health design of production equipment
GB 5226.1 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General specifications
GB/T 6576 machine lubrication system
GB/T 7344 AC servo motor general technical conditions
GB/T 7932 pneumatic system of general technical conditions
GB/T 13126 mechanical and electrical products wet and dry protective packaging general technical conditions
GB/T 13306 signs
GB/T 15316 energy-saving monitoring techniques
GB/T 16439 AC servo system general technical conditions
GB 20905 Casting machinery safety requirements
GB/T 25295 Electrical Equipment Safety Design Guidelines
GB 29741 aluminum electrolytic production safety norms
GB 50231 mechanical equipment installation and acceptance of common norms
GB 50882 light metal smelting machinery and equipment installation engineering construction specifications
JB/T 5000.3 Heavy machinery General technical requirements Part 3. Welded parts […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34642-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34642-2017
$355.00