Valid

JB/T 12535-2015Commissioning specification for carbon dioxide capture units for coal-fired flue gas (English PDF)

燃煤烟气碳捕集装置调试规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12535-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12535-2015 is the English-translated version of 燃煤烟气碳捕集装置调试规范.

Commissioning of carbon dioxide capture plant on coal-fired flue gas is governed by JB/T 12535-2015. The machinery industry standard gives terms and definitions for chemical absorption capture units and sets the requirements for starting the commissioning work, for commissioning itself, and for quality acceptance and assessment.

It applies to the commissioning of chemical absorption carbon dioxide capture units handling coal-fired flue gas with a capture capacity of one million tonnes a year or less, and the page notes that the commissioning of plant using other capture technologies may follow it as a reference. It was issued on 10 October 2015 and entered into force on 1 March 2016.

Found what you need?

Document preview — JB/T 12535-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General principles
  • 5 Start-up commissioning work
  • 5.1 General provisions
  • 5.2 Responsibilities of the start-up commissioning work
  • 5.3 Scope and items of the process commissioning
  • 5.4 Scope and items of the electrical commissioning
  • 5.5 Scope and items of the thermal control commissioning
  • 5.6 Scope and items of the chemical commissioning
  • 6 Trial running
  • 6.1 General provisions
  • 6.2 Stage of the sectional trial running
  • 6.3 Stage of the start-up trial running of the complete system
  • 7 Quality acceptance and assessment
  • 7.1 General provisions
  • 7.2 Scope of the quality acceptance and assessment
  • 7.3 Acceptance of the commissioning quality indexes and inspection methods
  • 7.4 Hot commissioning at the start-up of the complete system
  • 7.5 Full load trial running of 168 hours
  • Annex A (informative) Acceptance certificate after the sectional trial running
  • Annex B (informative) Certificate of custody of the equipment and of the systems
  • Annex C (informative) Acceptance and handover certificate of 168 hours of the carbon capture works
  • Annex D (informative) Quality inspection and assessment form of the sub-items of the adjustment and trial running of the carbon capture works
  • Annex E (informative) Comprehensive quality assessment form of the adjustment and trial running of the carbon capture device
  • Figure 1 Flow diagram of a typical carbon capture device for coal fired flue gas
  • Table 1 Assessment form of the commissioning quality indexes of the carbon capture device
  • Table 2 Table of the scope of the quality acceptance and assessment of the works
  • Table 3 Commissioning quality standards and inspection methods of the process (industrial) water system
  • Table 4 Commissioning quality standards and inspection methods of the steam and drain system
  • Table 5 Commissioning quality standards and inspection methods of the induced draught fan and of its auxiliary equipment
  • Table 6 Commissioning quality standards and inspection methods of the flue gas pre-treatment unit and of its auxiliary equipment
  • Table 7 Commissioning quality standards and inspection methods of the absorption tower
  • Table 8 Commissioning quality standards and inspection methods of the pit system of the absorption tower area

3 Terms and definitions

4 General principles

5 Start-up commissioning work

6 Trial running

7 Quality acceptance and assessment

Foreword

This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.

It is the first edition of this standard.

About this edition

JB/T 12535-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12535-2015 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12535-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12535-2015 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12535-2015 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is JB/T 12535-2015. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Similar standards

How to Download JB/T 12535-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12535-2015

$664.00