JB/T 12536-2015Operating specification for carbon dioxide capture units for coal-fired flue gas (English PDF)
燃煤烟气碳捕集装置运行规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12536-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12536-2015 is the English-translated version of 燃煤烟气碳捕集装置运行规范.
The operation of carbon dioxide capture plant on coal-fired flue gas is the subject of JB/T 12536-2015. This machinery industry standard gives terms and definitions for chemical absorption capture units and then covers the start-up and running of the plant, the operation of its equipment, safe operation, and operation and maintenance management.
It applies to the operation, maintenance and safety management of chemical absorption carbon dioxide capture units treating coal-fired flue gas with a capture capacity of one million tonnes a year or less.
The Ministry of Industry and Information Technology issued it on 10 October 2015, with effect from 1 March 2016.
Found what you need?
Document preview — JB/T 12536-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General principles
- 5 Start-up of the carbon capture device
- 5.1 Basic conditions before the start-up
- 5.2 Start-up steps
- 6 Operating adjustment
- 6.1 Main principles of the operating adjustment
- 6.2 Operating adjustment of the water balance of the system
- 6.3 Operating adjustment of the temperature of the absorption tower and of the regeneration tower
- 6.4 Operating adjustment of the solution of the system
- 6.5 Operating adjustment of the carbon dioxide storage tank
- 7 Shutdown of the device
- 7.1 Short shutdown (within 8 hours)
- 7.2 Long shutdown
- 7.3 Emergency shutdown
- 8 Handling of the main faults
- 8.1 Analysis of the causes of the anomalies of the carbon dioxide absorption system and their handling
- 8.2 Analysis of the causes of the anomalies of the carbon dioxide liquefaction system and their handling
- 8.3 Handling of the typical faults of the device
- 9 Safe operation
- 9.1 General principles
- 9.2 Management requirements of the ammonia area and of the chemical storage area
- 9.3 Safety technical requirements of the ammonia area and of the chemical storage area
- 9.4 Control of the hazard sources and emergency plan
- 10 Operation and maintenance management
- 10.1 General provisions
- 10.2 Personnel and operation management
- 10.3 Maintenance and servicing
- Annex A (informative) List of the analysis points
- Annex B (informative) List of the main control points
- Figure 1 Flow diagram of a typical carbon capture device for coal fired flue gas
- Table 1 Analysis of the causes of the anomalies of the carbon dioxide absorption system and their handling
- Table 2 Analysis of the causes of the anomalies of the carbon dioxide liquefaction system and their handling
- Table A.1 List of the analysis points
- Table B.1 List of the main control points
3 Terms and definitions
4 General principles
5 Start-up of the carbon capture device
6 Operating adjustment
7 Shutdown of the device
8 Handling of the main faults
9 Safe operation
10 Operation and maintenance management
Foreword
This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.
It is the first edition of this standard.
About this edition
JB/T 12536-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12536-2015 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
JB/T 12536-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12536-2015 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
JB/T 12536-2015 carries no ICS number in the official record.
The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
How this standard is designated
The full designation is JB/T 12536-2015. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 12536-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 12536-2015
$235.00