JB/T 12287-2015Guide for environmentally conscious design of electric tools (English PDF)
电动工具环境意识设计导则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12287-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12287-2015 is the English-translated version of 电动工具环境意识设计导则.
JB/T 12287-2015 is a recommended Chinese machinery industry standard that guides the environmentally conscious design of electric tools. It sets the terms and definitions for such design, the principles behind it, the requirements it must satisfy, and the documents and the exchange of information that go with it.
All kinds of power tool products fall within it, hand-held power tools, transportable power tools and garden power tools among them. The standard is classified K04 in the Chinese scheme.
Among the standards it quotes are GB/T 16288, GB/T 23686-2009, GB/T 24040-2008 and GB/T 29769-2013.
Found what you need?
Document preview — JB/T 12287-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12287-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that guides the environmentally conscious design of electric tools. It sets the terms and definitions for such design, the principles behind it, the requirements it must satisfy, and the documents and the exchange of information that go with it. All kinds of power tool products fall within it, hand-held power tools, transportable power tools and garden power tools among them. The standard is classified K04 in the Chinese scheme. Among the standards it quotes are GB/T 16288, GB/T 23686-2009, GB/T 24040-2008 and GB/T 29769-2013.
JB/T 12287-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 2900.28
GB 4343.1
GB 12348
GB 12523
GB/T 16288
GB/T 19000-2008 — Quality management systems - Fundamentals and vocabulary
GB/T 23686-2009 — Environmentally conscious design guide for electrical and electronic products
GB/T 24040-2008 — Environmental management -- Life cycle assessment -- Principles and frameworks
GB/T 29769-2013 — Waste electrical and electronic products recovery - Terminology
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
NB/T 10613-2021 — Technical specification of power quality measurement and evaluation for electric vehicle battery charging/swap station
GB/T 15543-2008 — Power quality - Three-phase voltage unbalance
GB/T 12325-2008 — Power quality - Deviation of supply voltage
JB/T 14958-2025 — Evaluation requirements for green factory in the transformer manufacturing industry
JB/T 14258-2022 — Electrotechnology renewable energy-Terminology
JB/T 12288-2015 — Guide for environmentally conscious design of lead-acid batteries
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.28Electrotechnical terminology - Electric tool
- GB 4343.1Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
- GB 12348Emission standard for industrial enterprises noise at boundary
- GB 12523Emission standard for construction noise
- GB/T 16288Marking of plastics products
- GB/T 19000-2008Quality management systems -- Fundamentals and vocabulary
Similar standards
How to Download JB/T 12287-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12348-1990 — Standard of noise at boundary of industrial enterprises
GB 12348-2008 — Emission standard for industrial enterprises noise at boundary
GB 12523-1990 — Noise limits for construction site
JB/T 12287-2015
$269.00