Valid

JB/T 11761-2013Gear-shaft blank produced by cross wedge rolling - Technical requirements (English PDF)

齿轮轴毛坯楔横轧技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11761-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 11761-2013 is the English-translated version of 齿轮轴毛坯楔横轧技术条件.

JB/T 11761-2013 is the recommended Chinese machinery industry standard giving the technical requirements for steel gear-shaft blanks produced by cross wedge rolling.

Alongside those requirements it sets the test methods, the inspection rules and the delivery conditions for the rolled blanks. It applies to blanks made on roll-type and plate-type cross wedge rolling machines at diameters of 170 mm and under.

The document is classified J32 in the Chinese system and 77.140.85 in the international one, and the Ministry of Industry and Information Technology issued it. Among the standards it quotes are GB/T 226, GB/T 231.1, GB/T 702-2008, GB/T 3077, GB/T 6394, GB/T 10561-2005 and GB/T 13320.

Found what you need?

Document preview — JB/T 11761-2013

National Standard of the People's Republic of China

ICS: 77.140.85

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword
Scope
Normative references
About this standard
Classification and status

1 Foreword

JB/T 11761-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.

2 Scope

This standard is the recommended Chinese machinery industry standard giving the technical requirements for steel gear-shaft blanks produced by cross wedge rolling. Alongside those requirements it sets the test methods, the inspection rules and the delivery conditions for the rolled blanks. It applies to blanks made on roll-type and plate-type cross wedge rolling machines at diameters of 170 mm and under. The document is classified J32 in the Chinese system and 77.140.85 in the international one, and the Ministry of Industry and Information Technology issued it. Among the standards it quotes are GB/T 226, GB/T 231.1, GB/T 702-2008, GB/T 3077, GB/T 6394, GB/T 10561-2005 and GB/T 13320.

3 Normative references

JB/T 11761-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 226

GB/T 231.1

GB/T 702-2008

GB/T 1979

GB/T 3077

GB/T 5216

GB/T 6394

GB/T 6402

GB/T 10561-2005

GB/T 13298

GB/T 13299

GB/T 13320

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Classification and status

International classification (ICS): 77.140.85

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

JB/T 9963.1-2015|GB/T 33878-2017|GB/T 32258-2015|JB/T 13117-2017|JB/T 9179.2-2013|GB/T 41655-2022

How to Download JB/T 11761-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.