JB/T 11467-2013Central impression cylinder flexographic presses (English PDF)
卫星式柔版印刷机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11467-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11467-2013 is the English-translated version of 卫星式柔版印刷机.
JB/T 11467-2013 is a recommended Chinese machinery industry standard on central impression cylinder flexographic presses. It describes how the press is made up and states its basic parameters, the requirements, the test methods, the inspection rules and what is asked for marking, instructions for use, packaging, transport and storage.
Reel-fed flexographic printing machines are what it applies to. The standard is classified J87 in the Chinese system and 37.100.10 in the international one. Among the standards it quotes are GB/T 191, GB 2894, GB/T 4979, GB 5226.1-2008, GB 6388, GB/T 9851.3-2008, GB/T 9969, GB/T 13384, GB/T 14436 and JB/T 6530. It was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 11467-2013
National Standard of the People's Republic of China
- ICS
- 37.100.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11467-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on central impression cylinder flexographic presses. It describes how the press is made up and states its basic parameters, the requirements, the test methods, the inspection rules and what is asked for marking, instructions for use, packaging, transport and storage. Reel-fed flexographic printing machines are what it applies to. The standard is classified J87 in the Chinese system and 37.100.10 in the international one. Among the standards it quotes are GB/T 191, GB 2894, GB/T 4979, GB 5226.1-2008, GB 6388, GB/T 9851.3-2008, GB/T 9969, GB/T 13384, GB/T 14436 and JB/T 6530.
JB/T 11467-2013 falls under ICS 37.100.10, in the field of image technology.
This catalogue holds 169 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 2894
GB/T 4979
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 6388
GB/T 9851.3-2008 — Terminology of graphic technology - Part 3: Terms for typography
GB/T 9969
GB/T 13384
GB/T 14436
JB/T 6530
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 10247-2016 — Open-pit crawler down-the-hole drills
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11459-2013 — Printing Machinery - Web-fed Rotary Hot Stamping Machine
JB/T 11458-2013 — Printing machinery - Web flexographic wire-stitching exercise book lines
JB/T 11457-2013 — Printing machinery - Laser paper developing and drying machines
6 Classification and status
International classification (ICS): 37.100.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 2894Safety colours and safety signs
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 9851.3-2008Terminology of graphic technology - Part 3: Terms for typography
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 13384General specifications for packing of mechanical and electrical product
GB/T 4979 · GB 6388
Similar standards
How to Download JB/T 11467-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 11467-2013
$240.00