JB/T 11291-2012High pressure grinding rolls for mining (English PDF)
矿用高压辊磨机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11291-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 11291-2012 is the English-translated version of 矿用高压辊磨机.
JB/T 11291-2012 is a recommended Chinese machinery industry standard for the high pressure grinding roll used in mining. It fixes the types and the basic parameters of the mill, then its technical requirements, test methods and inspection rules, and finally marking, packaging, transport and storage.
It applies to mining and metallurgy among the industrial uses of such mills. The document is classified D94 in the Chinese system and 73.120 in the international one.
Among the standards it quotes are GB/T 3639, GB/T 11345-1989, GB/T 13306, JB/T 1265 and JB/T 5000.15-2007.
Found what you need?
Document preview — JB/T 11291-2012
National Standard of the People's Republic of China
- ICS
- 73.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11291-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the high pressure grinding roll used in mining. It fixes the types and the basic parameters of the mill, then its technical requirements, test methods and inspection rules, and finally marking, packaging, transport and storage. It applies to mining and metallurgy among the industrial uses of such mills. The document is classified D94 in the Chinese system and 73.120 in the international one. Among the standards it quotes are GB/T 3639, GB/T 11345-1989, GB/T 13306, JB/T 1265 and JB/T 5000.15-2007.
JB/T 11291-2012 falls under ICS 73.120, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3639
GB/T 11345-1989 — Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
GB/T 13306
JB/T 1265
JB/T 5000.12
JB/T 5000.13
JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 10343-2025 — Vertical compound crusher
JB/T 11295-2012 — Heavy-duty cone crushers
JB/T 11294-2012 — Heavy-duty gyratory crushers
6 Classification and status
International classification (ICS): 73.120
Chinese Standard Classification (CCS): D 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3639Seamless cold-drawn or cold-rolled steel tubes for precision applications
- GB/T 11345-1989Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels and assessment
- GB/T 13306Plates
- JB/T 1265Rotor and shaft forgings for 25 MW to 200 MW steam turbines - Technical requirements
Similar standards
How to Download JB/T 11291-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 11291-2012
$165.00