JB/T 11169-2011Stationary elevating work platforms (English PDF)
固定式升降工作平台
This is a limited preview
Buy now to download the full PDF (31 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11169-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 11169-2011 is the English-translated version of 固定式升降工作平台.
JB/T 11169-2011 is the Chinese standard "Stationary elevating work platforms". The document is set out in 37 numbered clauses and sub-clauses, listed in full in the table of contents below.
The clause headings are those of the standard itself, taken from its official Chinese edition; the clause text is supplied with the English translation.
Found what you need?
Document preview — JB/T 11169-2011
National Standard of the People's Republic of China
- ICS
- 53.020.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification
- 4.1 Types
- 4.2 Specifications and models
- 4.3 Basic parameters
- 5 Technical requirements
- 5.1 Complete machine
- 5.2 Structure and stability
- 5.3 Extending structure
- 5.4 Transmission system of the extending structure
- 5.5 Work platform
- 5.6 Control
- 5.7 Electrical equipment
- 5.8 Hydraulic system
- 5.9 Hydraulic cylinder
- 5.10 Safety devices
- 5.11 Noise
- 5.12 Operational reliability
- 6 Test methods
- 6.1 Test prototype
- 6.2 Test conditions
- 6.3 Test instruments and tools
- 6.4 Inspection and testing
- 6.5 Type test
- 6.6 Factory test
- 6.7 Electrical test of insulating parts
- 6.8 Reliability test
- 7 Inspection rules
- 7.1 Factory inspection
- 7.2 Type test
- 8 Marking, packaging, transport and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transport
- 8.4 Storage
What this standard covers
This standard specifies the fixed elevating work platform (hereinafter referred to as SEWP) the terms and definitions, classification, technical requirements, test methods, inspection rules, marking, packaging, transport and storage. This standard applies to SEWP. This standard does not apply to: a) elevators and hydraulic elevators, b) fire protection and fire fighting equipment, c) high operating gondola and the gondola, d) rear crane, e) Mobile elevating work platforms, f) Amusement park equipment, g) mast climbing work platforms, h) to enhance personnel and material construction elevator: i) aircraft ground support equipment
Document data
International classification (ICS): 53.020.99.
Chinese classification (CCS): J80.
Estimated length of the Chinese original: 54,548 words.
Standards quoted by this document
GB/T 3811; GB 4208; GB 5226.1; GB/T 5972; GB/T 9465-2008; GB/T 9969; GB/T 11020; GB 14048.5; GB 16754; JB/T 5937; JB/T 5939; JB/T 5946; JG/T 5079.2; JG/T 5082.1; ISO 13854; ISO 20381
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 Types
4.2 Specifications and models
4.3 Basic parameters
5 Technical requirements
5.1 Complete machine
5.2 Structure and stability
5.3 Extending structure
5.4 Transmission system of the extending structure
5.5 Work platform
5.6 Control
5.7 Electrical equipment
5.8 Hydraulic system
5.9 Hydraulic cylinder
5.10 Safety devices
5.11 Noise
5.12 Operational reliability
6 Test methods
6.1 Test prototype
6.2 Test conditions
6.3 Test instruments and tools
6.4 Inspection and testing
6.5 Type test
6.6 Factory test
6.7 Electrical test of insulating parts
6.8 Reliability test
7 Inspection rules
7.1 Factory inspection
7.2 Type test
8 Marking, packaging, transport and storage
8.1 Marking
8.2 Packaging
8.3 Transport
8.4 Storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 31 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3811Design rules for cranes
- GB 4208Degrees of Protection Provided By Enclosure (IP Code)
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 5972Cranes - Wire ropes - Care and maintenance, inspection and discard
- GB/T 9465-2008Vehicle-mounted mobile elevating work platforms
- GB/T 9969General principles for preparation of instructions for use of industrial products
JG/T 5079.2 · ISO 13854 · ISO 20381
Similar standards
How to Download JB/T 11169-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14048.5-1993 — General rules for low-voltage switchgear and control-gear control circuit devices and switching elements section one. Electromechanical control circuit device
GB 14048.5-2001 — Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching element Electromechanical control circuit devices
GB 14048.5-2008 — Low-voltage switchgear and controlgear - Part 5-1:Control circuit devices and switching element - Electromechanical control circuit devices
JB/T 11169-2011
$1,134.00