Valid

JB/T 10918-2023Special equipment for transformers - Cut-to-length lines for silicon steel sheets (English PDF)

变压器专用设备 硅钢片横剪生产线

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10918-2023 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 16, 2023

Implementation date

February 1, 2024

Scope

JB/T 10918-2023 is the English-translated version of 变压器专用设备 硅钢片横剪生产线.

JB/T 10918-2023 covers silicon steel sheet cross-cutting production lines, a class of special equipment for transformer manufacture.

The standard gives the model designation and the technical requirements of these lines, describes the corresponding test methods, and lays down inspection rules together with requirements for labelling, packaging, transport, storage, installation, use and maintenance.

It applies to the manufacture of silicon steel sheet cross-cutting production lines used as special equipment for transformers. It supersedes JB/T 10918-2008, was issued on 28 July 2023 and entered into force on 1 February 2024.

Found what you need?

Document preview — JB/T 10918-2023

National Standard of the People's Republic of China

ICS
29.100.01
Replacing
JB/T 10918-2008

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Model
  • 5 Technical requirements
  • 5.1 General
  • 5.2 Operating environment and conditions
  • 5.3 Performance requirements
  • 5.4 Assembly requirements
  • 5.5 Safety protection
  • 5.6 Appearance quality
  • 5.7 Noise
  • 6 Test methods
  • 6.1 No-load running performance test
  • 6.2 Load running performance test
  • 6.3 Environmental adaptability test
  • 6.4 Inspection of the shearing accuracy
  • 6.5 Inspection of the assembly quality
  • 6.6 Inspection of the safety protection
  • 6.7 Inspection of the appearance quality
  • 6.8 Noise measurement
  • 7 Inspection rules
  • 8 Nameplate, packaging, transport and storage
  • 8.1 Nameplate
  • 8.2 Packaging
  • 8.3 Transport and storage
  • 9 Installation, use and maintenance
  • Table 1 Basic parameters
  • Table 2 Assembly quality requirements of the key components
  • Table 3 Quality requirements of the gap
  • Table 4 Inspection of the shearing accuracy
  • Table 5 Inspection of the feeder
  • Table 6 Inspection of the punching section
  • Table 7 Inspection of the shearing section
  • Table 8 Inspection of the hydraulic and pneumatic systems

What this standard covers

This standard specifies the model and technical requirements of the silicon steel sheet cross-cutting production line of special equipment for transformers, describes the corresponding test methods, and stipulates inspection rules, labelling, packaging, transportation, storage, installation, use and maintenance requirements. This standard applies to the manufacture of silicon steel sheet cross-cutting production lines for special equipment for transformers.

Document data

International classification (ICS): 29.100.01.

Chinese classification (CCS): K97.

Estimated length of the Chinese original: 13,156 words.

Supersedes the earlier edition JB/T 10918-2008.

3 Terms and definitions

4 Model

5 Technical requirements

6 Test methods

7 Inspection rules

8 Nameplate, packaging, transport and storage

9 Installation, use and maintenance

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 10918

EditionTitleRevisionStatus
JB/T 10918-2023Special equipment for transformers - Cut-to-length lines for silicon steel sheetscurrent editionCurrent
JB/T 10918-2008Special equipment for transformers - Cut-to-length lines for silicon steel sheetsprevious editionSuperseded

This page sells the current edition, JB/T 10918-2023. Earlier editions are listed for reference only.

How to Download JB/T 10918-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10918-2023

$195.00