JB/T 10830-2008Hydraulic solenoid-operated directional poppet valves (English PDF)
液压电磁换向座阀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10830-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 10830-2008 is the English-translated version of 液压电磁换向座阀.
JB/T 10830-2008 is the Chinese standard "Hydraulic solenoid-operated directional poppet valves".
Its scope clause reads: This standard specifies the basic parameters, technical requirements, test methods, inspection rules, marking, packaging and other requirements of solenoid operated directional poppet valve (hereinafter referred to as “solenoid poppet valve”).
This standard is applicable to the solenoid poppet valves with hydraulic oil or other liquids with equivalent performance as the operating medium. Its clauses include terms and definitions; dimension, symbols and units; marking and basic parameters.
Found what you need?
Document preview — JB/T 10830-2008
National Standard of the People's Republic of China
- ICS
- 23.100.50
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Dimension, symbols and units
- 5 Marking and basic parameters
- 5.1 Marking
- 5.2 Basic parameters
- 6 Technical requirements
- 6.1 General requirements
- 6.2 Performance requirements
- 6.3 Assembling requirements
- 6.4 Appearance requirements
- 7 Test method for performance
- 7.1 Test device
- 7.2 Test conditions
- 7.3 Test items and methods
- 8 Inspection of assembly and appearance
- 9 Inspection rules
- 9.1 Inspection classification
- 9.2 Sampling
- 9.3 Judgment rules
- 10 Marking and packaging
- Annex A (Normative) Test circuit and characteristic curve
1 Scope
This standard specifies the basic parameters, technical requirements, test methods, inspection rules, marking, packaging and other requirements of solenoid operated directional poppet valve (hereinafter referred to as “solenoid poppet valve”).
This standard is applicable to the solenoid poppet valves with hydraulic oil or other liquids with equivalent performance as the operating medium.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this national standard. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this code are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest editions apply.
GB/T 786.1 Fluid power systems and components—Graphic symbols and circuit diagrams (GB/T 786.1-1993, eqv ISO 1219-1: 1991)
GB/T 2346 Fluid power systems and components—Nominal pressures (GB/T 2346-2003, ISO 2944: 2000, MOD)
GB/T 2514 Hydraulic fluid power—Four-port directional control valves—Mounting surface (GB/T 2514-1993, eqv ISO 4401: 1980)
GB/T 2828.1 Sampling procedures for inspection by attributes—Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2003/ISO 2859-1: 1999)
GB/T 7935 Hydraulic fluid power—General requirements for hydraulic components
GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles (ISO 4406: 1999, MOD)
GB/T 17446 Fluid power systems and components—Terminology (GB/T 17446-1998, idt ISO 5598: 1985)
GB/T 17489 Hydraulic fluid power—Particulate contamination analysis—Extraction of fluid samples from lines of an operation system (GB/T 17489-1998, idt ISO 4021: 1992)
JB/T 7858 Method to determine cleanliness and acceptance criterions for hydraulic components
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in GB/T 17446, as well as the following apply.
3.1 nominal flow
nominal flow of solenoid poppet valve
3.2 test flow
specified flow when testing the performance of the tested valve
3.3 solenoid operated directional poppet valve
valve that can realize reversing and opening and closing functions by electromagnetically controlling the movement of a spherical or conical element
4 Dimension, symbols and units
See Table 1 for dimension, symbols and units.
5 Marking and basic parameters
5.1 Marking
Clear and permanent markings or nameplates shall be provided at appropriate and obvious positions on the products. The contents of the marking or nameplate shall meet the requirements of GB/T 7935, and the graphic symbols used shall meet the requirements of GB/T 786.1.
Table 1 Dimension, symbols and units […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 786.1Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols
- GB/T 2346Fluid power systems and components -- Nominal pressures
- GB/T 2514Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 7935Hydraulic fluid power - General requirements for hydraulic components
- GB/T 14039-2002Hydraulic fluid power—Contamination analysis—Method for coding the level of contamination by solid particles
Similar standards
How to Download JB/T 10830-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
GB/T 17446-1998 — Fluid power systems and components--Vocabulary
GB/T 17446-2012 — Fluid power systems and components - Vocabulary
JB/T 10830-2008
$195.00