JB/T 10492-2011Monitoring devices for metal-oxide surge arresters (English PDF)
金属氧化物避雷器用监测装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10492-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 10492-2011 is the English-translated version of 金属氧化物避雷器用监测装置.
JB/T 10492-2011 is the Chinese machinery industry standard covering monitoring devices for metal-oxide surge arresters. It was issued on 20 December 2011 and has been in force since 1 April 2012, replacing JB/T 2440-1991.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2011 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10492-2011
National Standard of the People's Republic of China
- Replacing
- JB/T 2440-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Marking and classification
- 4.1 Marking of the monitoring device
- 4.2 Classification of the monitoring device
- 5 Service conditions
- 6 Technical requirements
- 6.1 Requirements on the appearance
- 6.2 External insulation withstand performance
- 6.3 Residual voltage
- 6.4 Sealing performance
- 6.5 Operating performance
- 6.6 Impulse current withstand of the monitoring device
- 6.7 Temperature cycling performance
- 6.8 Vibration and shock performance
- 6.9 Current measuring performance
- 6.10 Power frequency current withstand
- 6.11 Short-circuit current withstand
- 7 Test methods
- 7.1 Measuring equipment and accuracy
- 7.2 Provisions on the waveform and amplitude of the impulse current
- 7.3 Test samples
- 7.4 Inspection of the appearance
- 7.5 External insulation withstand test
- 7.6 Residual voltage test
- 7.7 Sealing test
- 7.8 Operating performance test
- 7.9 High current impulse withstand test
- 7.10 Square wave impulse current withstand test
- 7.11 Temperature cycling performance test
- 7.12 Vibration and shock performance test
- 7.13 Current measuring performance test
- 7.14 Power frequency current withstand capability test
- 8 Inspection rules
- 8.1 Classification of the tests
- 8.2 Routine tests
- 8.3 Sampling tests
- 8.4 Type tests
- 8.5 Periodic tests
- 8.6 Acceptance tests
- Annex A (informative) Monitors for the arresters of the 1 000 kV ultra high voltage alternating current demonstration project
- Annex B (informative) Packaging, transport and keeping
- B.1 Packaging
- B.2 Technical documents supplied with the product
- B.3 Transport and keeping
- Figure 1 Order of the cold and hot cycling test
- Table 1 Characteristic parameters of the monitoring device
- Table 2 Items of the routine tests
- Table 3 Items of the sampling tests
- Table 4 Items of the type tests
- Table 5 Items of the periodic tests
- Table A.1 Main technical parameters of the monitor
What this standard covers
This standard specifies the marking, classification, operating conditions, and technical requirements for monitoring devices used in metal oxide surge arresters. It describes the corresponding test methods and specifies inspection rules, packaging, transportation, and storage requirements. This document applies to the manufacture of monitoring devices for metal oxide surge arresters in AC/DC transmission systems.
Document data
International classification (ICS): 29.080.99.
Chinese classification (CCS): K49.
Estimated length of the Chinese original: 26,249 words.
4 Marking and classification
5 Service conditions
6 Technical requirements
7 Test methods
8 Inspection rules
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 10492
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10492-2011 | Monitoring devices for metal-oxide surge arresters | current edition | Current |
| JB/T 2440-1991 | Monitoring devices for metal-oxide surge arresters | previous edition | Superseded |
This page sells the current edition, JB/T 10492-2011. Earlier editions are listed for reference only.
How to Download JB/T 10492-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 10492-2011
$195.00