JB/T 10347-2015Friction hoist - Friction lining (English PDF)
摩擦式提升机 摩擦衬垫
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10347-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 10347-2015 is the English-translated version of 摩擦式提升机 摩擦衬垫.
The friction linings of friction hoists are the subject of JB/T 10347-2015, a recommended standard of the Chinese machinery industry. It fixes the types and basic parameters of the lining, its technical requirements, the test methods and the inspection rules, describes the failure modes, and covers marking, packaging, transport and storage.
The linings addressed are those through which force passes between the friction wheel of a hoist and the rope, and other comparable friction drive situations are taken in as well.
It quotes GB/T 2406.2, GB/T 2411, GB/T 13384 and MT 113. It replaces the 2002 edition, JB/T 10347-2002, and is classified D93 with ICS 73.100.40.
Found what you need?
Document preview — JB/T 10347-2015
National Standard of the People's Republic of China
- ICS
- 73.100.40
- Replacing
- JB/T 10347-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10347-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 10347-2002.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
The friction linings of friction hoists are the subject of JB/T 10347-2015, a recommended standard of the Chinese machinery industry. It fixes the types and basic parameters of the lining, its technical requirements, the test methods and the inspection rules, describes the failure modes, and covers marking, packaging, transport and storage. The linings addressed are those through which force passes between the friction wheel of a hoist and the rope, and other comparable friction drive situations are taken in as well. It quotes GB/T 2406.2, GB/T 2411, GB/T 13384 and MT 113. It replaces the 2002 edition, JB/T 10347-2002, and is classified D93 with ICS 73.100.40.
JB/T 10347-2015 falls under ICS 73.100.40, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2406.2
GB/T 2411
GB/T 13384
MT 113
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10347-2002 (earlier edition)
Standards on related subjects:
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
MT/T 716-2019 — Technical delivery requirements of steel wire ropes for coal mine hoisting
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 14597-2025 — Unloader for mining belt conveyor
JB/T 14596-2025 — Guide trough for mining belt conveyor
JB/T 14594-2025 — Underground mining blasting equipment transport vehicle
6 Classification and status
International classification (ICS): 73.100.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2406.2Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
- GB/T 2411Plastics and ebonite -- Determination of indentation hardness by means of a durometer (shore hardness)
- GB/T 13384General specifications for packing of mechanical and electrical product
- MT 113General Test Methods and Judgment Rules for Fire-resistant Antistatic Properties of Polymer Products for Coal Mines
Similar standards
Editions of JB/T 10347
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10347-2015 | Friction hoist - Friction lining | current edition | Current |
| JB/T 10347-2002 | Friction hoist - Friction lining | previous edition | Superseded |
This page sells the current edition, JB/T 10347-2015. Earlier editions are listed for reference only.
How to Download JB/T 10347-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 2406.2-2009 — Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
JB/T 10347-2015
$219.00