JB/T 10316-2013Insulating supports and insulating materials for low-voltage switchgear and controlgear assemblies (English PDF)
低压成套开关设备和控制设备绝缘支撑部件和绝缘材料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10316-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10316-2013 is the English-translated version of 低压成套开关设备和控制设备绝缘支撑部件和绝缘材料.
JB/T 10316-2013 is a recommended Chinese machinery industry standard on the insulating supporting parts and the insulating materials used in low-voltage switchgear and controlgear assemblies.
It lays down the technical requirements these parts and materials must satisfy and the methods used to test them. Inspection rules are set out, together with the conditions for marking, packaging, transport and storage.
The Ministry of Industry and Information Technology issued the document, which sits under the classifications K36 and 29.120.40. Among the standards it quotes are GB/T 2423.4, GB/T 4207, GB/T 5169.10, GB/T 5169.21-2006, GB 7251.1-2005 and GB/T 11020-2005. The edition it takes the place of is JB/T 10316-2002.
Found what you need?
Document preview — JB/T 10316-2013
National Standard of the People's Republic of China
- ICS
- 29.120.40
- Replacing
- JB/T 10316-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 10316-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 10316-2002.
2 Scope
This standard is a recommended Chinese machinery industry standard on the insulating supporting parts and the insulating materials used in low-voltage switchgear and controlgear assemblies. It lays down the technical requirements these parts and materials must satisfy and the methods used to test them. Inspection rules are set out, together with the conditions for marking, packaging, transport and storage. The Ministry of Industry and Information Technology issued the document, which sits under the classifications K36 and 29.120.40. Among the standards it quotes are GB/T 2423.4, GB/T 4207, GB/T 5169.10, GB/T 5169.21-2006, GB 7251.1-2005 and GB/T 11020-2005. The edition it takes the place of is JB/T 10316-2002.
3 Normative references
JB/T 10316-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2423.4
GB/T 4207
GB/T 5169.10
GB/T 5169.16
GB/T 5169.21-2006
GB 7251.1-2005
GB/T 11020-2005
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10316-2002 (earlier edition)
6 Classification and status
International classification (ICS): 29.120.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.4Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 4207Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- GB/T 5169.10Fire hazard testing for electric and electronic products -- Part 10: Glowing/hot-wire based test methods -- Glow-wire apparatus and common test procedure
- GB/T 5169.16Fire hazard testing for electric and electronic products -- Part 16: Test flames--50 W horizontal and vertical flame test methods
- GB/T 5169.21-2006Fire hazard testing for electric and electronic products -- Part 21: Abnormal heat -- Ball pressure test method
GB 7251.1-2005 · GB/T 11020-2005
Similar standards
Editions of JB/T 10316
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10316-2013 | Insulating supports and insulating materials for low-voltage switchgear and controlgear assemblies | current edition | Current |
| JB/T 10316-2002 | Insulating supports and insulating materials for low-voltage switchgear and controlgear assemblies | previous edition | Superseded |
This page sells the current edition, JB/T 10316-2013. Earlier editions are listed for reference only.
How to Download JB/T 10316-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 4207-2022 — Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 5169.10-2017 — Fire hazard testing for electric and electronic products -- Part 10: Glowing/hot-wire based test methods -- Glow-wire apparatus and common test procedure
Secure payment via Stripe
Payments accepted
JB/T 10316-2013
$299.00