JB/T 10278-2015Flash dryers (English PDF)
气流干燥机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10278-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 10278-2015 is the English-translated version of 气流干燥机.
Flash dryers are covered by JB/T 10278-2015, a recommended standard issued for the Chinese machinery industry by the Ministry of Industry and Information Technology.
It specifies the type and the marking of these airflow dryers, their technical requirements, the test methods and the inspection rules, and goes on to signs, operating instructions, packaging, transport and storage.
The machines concerned are air dryers used on powdered and granular materials. Among the standards it quotes are GB/T 191-2008, GB 5226.1-2008, GB/T 9969-2008, GB/T 10111, GB/T 24342-2009, JB/T 5973-1992 and SJ/T 10674-1995. It replaces JB/T 10278-2001 and carries the Chinese classification J78.
Found what you need?
Document preview — JB/T 10278-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 10278-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10278-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
It replaces the earlier edition JB/T 10278-2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Flash dryers are covered by JB/T 10278-2015, a recommended standard issued for the Chinese machinery industry by the Ministry of Industry and Information Technology. It specifies the type and the marking of these airflow dryers, their technical requirements, the test methods and the inspection rules, and goes on to signs, operating instructions, packaging, transport and storage. The machines concerned are air dryers used on powdered and granular materials. Among the standards it quotes are GB/T 191-2008, GB 5226.1-2008, GB/T 9969-2008, GB/T 10111, GB/T 24342-2009, JB/T 5973-1992 and SJ/T 10674-1995. It replaces JB/T 10278-2001 and carries the Chinese classification J78.
JB/T 10278-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 3095-1996 — Ambient air quality standard
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 6388
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 10111
GB/T 13306
GB/T 13384
GB/T 24342-2009 — Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications
JB/T 5973-1992 — Drying machines - Determination of sound power level of noise - Simple method
JB/T 6924-1998 — Type designation method for drying equipment products
SJ/T 10674-1995
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10278-2001 (earlier edition)
Standards on related subjects:
GB/T 10894-2023 — Determination method of separation machinery noise
JB/T 4333.2-2013 — Recessed plate filter press & plate and frame filter press - Part 2: Technical specifications
JB/T 8947-2008 — Rubber belts for fixed chamber belt vacuum filters
JB/T 14960-2025 — Minimum allowable values of the energy efficiency and energy efficiency grades for vacuum drying equipment systems
JB/T 11716-2025 — Screw type dry vacuum pump
JB/T 10279-2013 — Cylinder Drier
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 3095-1996Ambient air quality standards
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 9969-2008General principles for preparation of instructions for use of industrial products
- GB/T 10111Generation of random numbers and procedures applied to sampling inspection for product quality
- GB/T 13306Plates
GB 6388
Similar standards
Editions of JB/T 10278
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10278-2015 | Flash dryers | current edition | Current |
| JB/T 10278-2001 | Flash dryers | previous edition | Superseded |
This page sells the current edition, JB/T 10278-2015. Earlier editions are listed for reference only.
How to Download JB/T 10278-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 3095-1996 — Ambient air quality standard
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10111-1988 — Methods for random sampling by utilizing dices of random number
JB/T 10278-2015
$219.00