JB/T 10245-2015Double roll crushers (English PDF)
双辊破碎机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10245-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 10245-2015 is the English-translated version of 双辊破碎机.
Double-roll crushers are the subject of JB/T 10245-2015, a recommended standard of the Chinese machinery industry. The document fixes the types and basic parameters of these crushers, then their technical requirements, test methods and inspection rules, and closes with marking, packaging, transport and storage.
It is written for machines crushing ore of medium hardness or above with a crushing strength up to 160 MPa, and also rock, coal, coke, slag, sea salt and other brittle non-metallic materials; double-roll crushers working on clay and rubber fall under it as well.
Among the standards it quotes are GB/T 191, GB/T 699-1999, GB/T 3768, GB/T 25706, JB/T 5000.3 and JB/T 5000.12-2007. It takes the place of JB/T 10245-2001.
Found what you need?
Document preview — JB/T 10245-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 10245-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10245-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 10245-2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Double-roll crushers are the subject of JB/T 10245-2015, a recommended standard of the Chinese machinery industry. The document fixes the types and basic parameters of these crushers, then their technical requirements, test methods and inspection rules, and closes with marking, packaging, transport and storage. It is written for machines crushing ore of medium hardness or above with a crushing strength up to 160 MPa, and also rock, coal, coke, slag, sea salt and other brittle non-metallic materials; double-roll crushers working on clay and rubber fall under it as well. Among the standards it quotes are GB/T 191, GB/T 699-1999, GB/T 3768, GB/T 25706, JB/T 5000.3 and JB/T 5000.12-2007. It takes the place of JB/T 10245-2001.
JB/T 10245-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels
GB/T 3768
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 13306
GB/T 13384
GB/T 25706
JB/T 5000.3
JB/T 5000.12-2007 — General technical requirements for heavy machinery - Part 12: Painting
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10245-2001 (earlier edition)
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 14593-2025 — Single-cylinder hydraulic cone crusher - Hydraulic and lubrication devices
JB/T 10343-2025 — Vertical compound crusher
JB/T 10246-2015 — Impact crushers for hard rock
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 699-1999Quality carbon structure steels
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 9239.1-2006Mechanical vibration—Rotor balancing—Part 1:Introduction
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
Similar standards
Editions of JB/T 10245
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10245-2015 | Double roll crushers | current edition | Current |
| JB/T 10245-2001 | Double roll crushers | previous edition | Superseded |
This page sells the current edition, JB/T 10245-2015. Earlier editions are listed for reference only.
How to Download JB/T 10245-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 10245-2015
$199.00